Okay guys... So i have a 88' Wagoneer XJ. This models components are virtually the same as the 88' Cherokee XJ. I bought this Wagoneer about a month ago thinking it just needed a new alternator and a tune up...... When i Bought it it ran but the battery wouldnt hold a charge. Replaced the alternator it ran for 1 day. Next day went to go to Auto zone and only made it about a quarter of a mile before it started sputtering then died. then it started 3 more time after letting it sit for a while. But would only run for about 3-5 seconds. I am getting no spark at all.I have replace the ignition coil, CPS, Spark plugs, and the alternator. I do have fuel at the rail. and my fuel pump does kick on after turning the key. It cranks and cranks and cranks but will not fire! PLEASE HELP!!!

Thank you very much.

 

check the distributor?

 

How do i check it? And what am i looking for? Thanks for the reply!

 

Ok, are you getting injector pulse? Also have you actually checked fuel pressure?

 

I dont have a fuel pressure gauge... My Manual is not very clear about the injector pulse. How can i check that? I am about to go check the distributor right now.

 

it can be done with a volt meter
search it on google

 

you get them.

 

No carbon tracks or cracks on the cap on the terminals inside the cap there is a tiny amount of black chalky stuff that was on my finger after i rubed the terminal. does this mean its charred? Aslo there is a weird thick brown liquid sitting at the bottom of the distibutor. could this be the problem?

 

post pics an option for you

 

http://www.facebook.com/photo.php?fb...5&id=584218151

 

Not sure why but it wont let me upload any pics

 

page not showing

 

http://www.facebook.com/album.php?ai...1&l=54cf1a68b4

Here is a link it should be public.

 

i send mine to my email then save on pc then put on here ?

 

there is a module in there its a cam position sensor it could be the prob this module sends a signal to the ecm when to shoot fuel from the injectours