87 XJ 4.0 stutters/chokes
Thread Starter
CF Veteran
Joined: Sep 2010
Posts: 21,168
Likes: 5
From: Milwaukee, WI
Year: 1987
Engine: Check
Drink.
Or do you mean on the XJ? Haha
I've got a never ending list, some maintenance, some upgrading, but time, real knowledge, and money sometimes aren't there.
For example, I have a JCR 1 ton OTK steering kit sitting in the garage. Never done an OTK swap, and I don't have a good reemer or welder so those just sit.
I have my new motor mounts from Iron Man 4x4 on their way, finally, and once those get here I have an engine hoist, so they'll actually get installed. Then I can install my 3 core radiator and replace the rest of the cooling system without fear of tbe fan hitting the rad.
So thats the next project, maybe for next weekend?
Or do you mean on the XJ? Haha
I've got a never ending list, some maintenance, some upgrading, but time, real knowledge, and money sometimes aren't there.
For example, I have a JCR 1 ton OTK steering kit sitting in the garage. Never done an OTK swap, and I don't have a good reemer or welder so those just sit.
I have my new motor mounts from Iron Man 4x4 on their way, finally, and once those get here I have an engine hoist, so they'll actually get installed. Then I can install my 3 core radiator and replace the rest of the cooling system without fear of tbe fan hitting the rad.
So thats the next project, maybe for next weekend?
::CF Moderator::
Joined: Aug 2011
Posts: 43,971
Likes: 1,578
From: Prescott, Az
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
Thread Starter
CF Veteran
Joined: Sep 2010
Posts: 21,168
Likes: 5
From: Milwaukee, WI
Year: 1987
Engine: Check
Yeah, someone suggested that in a thread I made. 
https://www.cherokeeforum.com/f59/du...leaner-147723/

https://www.cherokeeforum.com/f59/du...leaner-147723/
::CF Moderator::
Joined: Aug 2011
Posts: 43,971
Likes: 1,578
From: Prescott, Az
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
I'm gonna go with "winter project".
::CF Moderator::
Joined: Aug 2011
Posts: 43,971
Likes: 1,578
From: Prescott, Az
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
Thread Starter
CF Veteran
Joined: Sep 2010
Posts: 21,168
Likes: 5
From: Milwaukee, WI
Year: 1987
Engine: Check
Went ti start it today and got nothing.
Going to grab CPS and coil.
And sadly I don't know where most of my tools are, we're less than 2 weeks away from closing on our house, and most of my crap is packed.
Going to grab CPS and coil.
And sadly I don't know where most of my tools are, we're less than 2 weeks away from closing on our house, and most of my crap is packed.
CF Veteran
Joined: Aug 2011
Posts: 10,489
Likes: 24
From: Nor-Cal Coast
Year: 90,84
Model: Cherokee
Engine: 4.0,2.5
These seem to work OK. For a while anyway!
http://www.harborfreight.com/7-funct...ter-98025.html
Only does tenths of a volt AC, but say a low .3 like .32 might flash a .2 now and then. When my CPS got there is when I got the echlin #css980.
Congrads on the house!
http://www.harborfreight.com/7-funct...ter-98025.html
Only does tenths of a volt AC, but say a low .3 like .32 might flash a .2 now and then. When my CPS got there is when I got the echlin #css980.
Congrads on the house!



....
It's still a virgin. Even still has it's little tube taped on there. I put it in a little glass case.