The wheel is not mating true to the hub (clean both surfaces w/ wire brush, torque in a cris-cross pattern to specs, etc.) or the wheel has excessive runout.

I will check this, but I just put a brand new hub on my passenger side front. Before and after it has a bad wobble/vibration only 55-65mph. The vibration only comes from the passenger front. I had the wheels and tires balanced thinking that would take care of it but to no avail. I need to check the ball joints as they might be bad as well. The steering appears to be tight but with 180,xxx your guess is as good as mine.

I did this to both the front wheels...
i cleaned the inside of the wheel, inside and outside the rotor, and the hub surface... it didnt change anything... it's very frustrating... i've been trying to figure this out since april...

oct.

Have you replaced any parts?

hi,

yes, new tires, one new wheel, both u-joints, and steering damper,
brake pads and new rotors... wheels have been balanced and re balanced...

thanks,

oct.

Thank you. I leaning toward ball joints at this point. Guess thats my next thing to replace.

same thing just started today after jockeying 2014 GC out of snow pile. Thinking it might be a broken or slipped belt in tire. How likely is that? Can yours be same problem? Got 44,000 miles on original Goodyear Futera tires. No shaking under 50mph or so.