Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here XJ (84-01)
All OEM related XJ specific tech. Examples, no start, general maintenance or anything that's stock.

4 bolts holding my trailer hitch

Thread Tools
 
Search this Thread
 
Old May 17, 2010 | 08:35 PM
  #1  
Dan4governor's Avatar
Thread Starter
Seasoned Member
 
Joined: Jan 2009
Posts: 443
Likes: 2
From: Prescott, AZ
Year: 1996
Model: Cherokee
Engine: 4.0L
Default 4 bolts holding my trailer hitch

hey guys, I pulled a factory trailer hitch from a junk yard and installed it on my jeep. for some reason, only the four holes closest to the hitch end lined up okay with my jeep (two on each side). will 4 bolts be strong enough? I don't really plan to tow anything, just want to use it as a recovery point.
Thanks,
Dan
Reply
Old May 17, 2010 | 08:45 PM
  #2  
mwdouglas's Avatar
CF Veteran
 
Joined: Feb 2010
Posts: 1,010
Likes: 0
From: gloucester va
Year: 1990
Model: Cherokee
Engine: 4.0
Default

how far off or out off alignment are the other holes on the hitch in relation to the holes on the jeep
Reply
Old May 17, 2010 | 08:50 PM
  #3  
93gc40's Avatar
CF Veteran
 
Joined: Mar 2009
Posts: 2,750
Likes: 3
From: Visalia, Kalifornia, ussa
Year: 1996
Model: Cherokee
Engine: 4.0
Default

With 4 bolts its only good for decoration, NON useable for any thing. Stock hitch should have 10 bolts, 8 would work the 2 on the body could be leftout but the fraim rail are not strong enough for 2 bolt per side. Are you sure it stock and from an XJ?
Reply
Old May 17, 2010 | 09:02 PM
  #4  
Dan4governor's Avatar
Thread Starter
Seasoned Member
 
Joined: Jan 2009
Posts: 443
Likes: 2
From: Prescott, AZ
Year: 1996
Model: Cherokee
Engine: 4.0L
Default

sure as sure. I pulled it off an xj. there are only 8 bolts. the nut strips line up with the holes on my jeep, and they lined up with the holes on the hitch, but for some reason when I put all three together they don't line up. the last two holes on each side are offset by about 1/4 inch.
Reply
Old May 17, 2010 | 09:08 PM
  #5  
mwdouglas's Avatar
CF Veteran
 
Joined: Feb 2010
Posts: 1,010
Likes: 0
From: gloucester va
Year: 1990
Model: Cherokee
Engine: 4.0
Default

did you get it from a jy and if so was the xj wrecked that you got it off of if it was wrecked the hitch could be slightly twisted and not letting the holes line up
Reply
Old May 17, 2010 | 09:23 PM
  #6  
jeepride's Avatar
Senior Member
 
Joined: Jul 2008
Posts: 709
Likes: 0
From: West Virginia
Year: 98
Model: Cherokee
Engine: 4.0L
Default

My rear hitch drawtite has only 4 bolts per side thats all they is and they aint no more.
Reply
Old May 18, 2010 | 02:10 AM
  #7  
Dan4governor's Avatar
Thread Starter
Seasoned Member
 
Joined: Jan 2009
Posts: 443
Likes: 2
From: Prescott, AZ
Year: 1996
Model: Cherokee
Engine: 4.0L
Default

Originally Posted by mwdouglas
did you get it from a jy and if so was the xj wrecked that you got it off of if it was wrecked the hitch could be slightly twisted and not letting the holes line up
the front end was bashed up...i guess that could've tweaked the unibody a little. plus my jeep got in an accident before I owned it (salvaged title). I didn't think about it, thats probably the problem.
Thanks
Reply
Old May 18, 2010 | 09:42 AM
  #8  
nickl's Avatar
Member
 
Joined: Feb 2010
Posts: 172
Likes: 0
From: surrey, bc, canada
Year: 1999
Model: Cherokee
Engine: 4.0l
Default

my '99 with a mopar hitch had only 6 bolts....
Reply
Old May 18, 2010 | 11:29 AM
  #9  
superj's Avatar
CF Veteran
 
Joined: Feb 2010
Posts: 2,004
Likes: 40
From: corpus christi, texas
Year: 1999
Model: Cherokee (XJ)
Engine: 4.0 I6
Default

my hidden hitch only went on with 6 bolts also, if i remember right.

it works though, towed the wife's heavy *** liberty across town at 55mph with no problems
Reply
Old May 18, 2010 | 02:27 PM
  #10  
breakthecycle128's Avatar
Member
 
Joined: Apr 2010
Posts: 150
Likes: 2
From: Marion, IN
Year: 2001
Model: Cherokee
Engine: 4.0
Default

My 93 XJ stock hitch only has 8
Reply
Old May 18, 2010 | 07:23 PM
  #11  
ReverendOD's Avatar
Member
 
Joined: Feb 2010
Posts: 124
Likes: 0
Model: Cherokee
Default

01' XJ factory hitch only had 8 but one snapped in the nut strip when i installed the gas tank skid. Ive towed quite a bit with just 7 bolts and no problems.
Reply
Old May 18, 2010 | 07:32 PM
  #12  
Inflames's Avatar
Newbie
 
Joined: May 2010
Posts: 11
Likes: 0
From: Bartow fl
Year: 99
Model: Cherokee
Engine: 4.0
Default

I just put on on my 99 last week and it only had 6 total anchor points... Ive towed my 12x6 trailer a good bit sence then with no problems. But I need to check this weekend to see if any need to bee tightened up or if any thing has happened under there.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
t.mcginley.jr
Jeep Builds
105
Jan 31, 2024 04:58 PM
NM-XJ
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
18
Oct 23, 2018 04:21 PM
hogluvr
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
7
Sep 16, 2015 08:15 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 11:31 PM.