33" TSL's and Airsoft
Thread Starter
Member
Joined: Dec 2009
Posts: 172
Likes: 0
From: Tampa FLA
Year: 93
Model: Cherokee
Engine: 4.0
I did this with my 33 ,13.5 swampers. If your tires are new, go get them balanced, and if they can't(if seen this on swampers) then I would go with the pellets.
I dont like the pellets because they only start to balance when you gain speed.
swampers are a very hard tire to balance espicialy if your drive alot of roads,
I dont like the pellets because they only start to balance when you gain speed.
swampers are a very hard tire to balance espicialy if your drive alot of roads,
it's the worst ride ever... Now I have to go have the bead broke again, remove the beads and have them balanced normally. I tried and they wont balance out with the beads in them. Every time the machine asks for a different wieght. So my experience is this method blows 
dont waste your time if you have interco's or other big meaty tires.
Senior Member
Joined: Apr 2009
Posts: 522
Likes: 0
From: Ontario
Year: 98' and 99'
Model: Cherokee
Engine: 4.0
You are exactly right!!! I put the beads in (they are new swampers) and OMG it's the worst ride ever... Now I have to go have the bead broke again, remove the beads and have them balanced normally. I tried and they wont balance out with the beads in them. Every time the machine asks for a different wieght. So my experience is this method blows dont waste your time if you have interco's or other big meaty tires.
it's the worst ride ever... Now I have to go have the bead broke again, remove the beads and have them balanced normally. I tried and they wont balance out with the beads in them. Every time the machine asks for a different wieght. So my experience is this method blows dont waste your time if you have interco's or other big meaty tires.
Member
Joined: Jul 2009
Posts: 168
Likes: 0
From: Goldsboro, NC
Year: 2001
Model: Cherokee
Engine: 4.0
You are exactly right!!! I put the beads in (they are new swampers) and OMG it's the worst ride ever... Now I have to go have the bead broke again, remove the beads and have them balanced normally. I tried and they wont balance out with the beads in them. Every time the machine asks for a different wieght. So my experience is this method blows dont waste your time if you have interco's or other big meaty tires.
it's the worst ride ever... Now I have to go have the bead broke again, remove the beads and have them balanced normally. I tried and they wont balance out with the beads in them. Every time the machine asks for a different wieght. So my experience is this method blows dont waste your time if you have interco's or other big meaty tires.
Thread Starter
Member
Joined: Dec 2009
Posts: 172
Likes: 0
From: Tampa FLA
Year: 93
Model: Cherokee
Engine: 4.0
It started to ride bad above 35mph and there BIAS. I took the beads out and had them balanced and its better but still shakes above 60mph but I think thats my shocks.
Member
Joined: Dec 2009
Posts: 220
Likes: 0
From: Central MA
Year: 1997
Model: Cherokee
Engine: 4.0I6
mine shakes bad even after balancing but its over like 50 i think its my rotors and a bad u joint, this whole bb balancing seems cool but all ive heard about it is crap
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)