33" TIRES
#1
Newbie
Thread Starter
Join Date: Mar 2010
Location: elk grove, ca
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1991 limited
Model: Cherokee
Engine: 4.0 ho
33" TIRES
i having my jeep lifted close to 5" aspossible. its never exact due to sagging in the rear. i trimmed front and rear and was wondering if i would have rubbing in the rear with 33x12.50 r15. i have soft 8s with 4.75" back spacing? i know i will rub in the front. thanks
#2
Seasoned Member
Join Date: Sep 2010
Location: Regina, Saskatchewan
Posts: 285
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1995
Model: Cherokee
Engine: 4.0L 99+intake jeepers creepers 62mm tb 703 injectors cold air
some people run 33s on a 3" lift with fenders cut, if you adjust the bump stops you'll have plenty of extra room
#4
CF Veteran
Join Date: Jul 2010
Location: 802
Posts: 4,930
Likes: 0
Received 3 Likes
on
3 Posts
Year: 99
Model: Cherokee
Engine: 4.0
depending on what kinda riding you will be doing, a narrower tire will bite down into the terrain harder cause the surface area is reduced... i dont know about 33x950 or even a 33x1050 availability, though...
i am seeing a few bfg's... ugh...
i am seeing a few bfg's... ugh...
Last edited by VTJeep; 10-31-2010 at 09:32 AM.
Trending Topics
#8
Newbie
Thread Starter
Join Date: Mar 2010
Location: elk grove, ca
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1991 limited
Model: Cherokee
Engine: 4.0 ho
thanks i think i am going to look for 33x12.5 r15. oh my rims where 15x8 with 4.75 bs. i am going to risk it and if it dosent work i guess i have to get spacers or new rims. i am trimed pretty good so if it rubs it would be aginst the leaf springs.
Thread
Thread Starter
Forum
Replies
Last Post
2heapjeeps
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
13
10-04-2015 10:52 PM
xltom
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
9
09-19-2015 01:37 PM
2heapjeeps
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
2
09-07-2015 11:30 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)