Anyone used 32" tires with a 3 1/2-4" lift? Presently have 31s which have no problems with clearance on standard wheel wells but considering 32s. Tks

 

Worked for me on 4".

Was close to rubbing the back flares when I had them.

Doesn't make much difference off road but does on road. I didn't mind 32s on stock gears though.

 

they fit nicely

 

where are you getting your 32s from?
i used to have a set that i sold to a friend that was running them on a 3 inch lift with trimming but now i cant find a set of 32s at the tire shop?

 

They will fit with a 4.5" or higher very easily. Otherwise I'd personally stick with the 31's. Mine has 32x11.5 bfg all terrains's without backspacing or spacers, just factory wheels. With a steering box brace and a drop pitman, I haven't any issues thus far. btw mines a 89 limited.

 

Not sure yet-seem them advertisized in Mags, internet, etc.

 

u might have to trim a lil bit if your putting on mud terrain tires.

 

perfect 32's are hard to find. they arent a common size usually by Pro Comp or BFG

 

I have 32"s just sittin around waiting for me to get a lift kit....

 

I also have a set of 32x11.5 goodyear wrangler mtr's on my s10 zr2 pickup.

 

i have 32x11.50's with a 4.5" lift, check out my albums for pics

 

I'm glad I found this thread, I just bought 32s a couple days ago from a friend, I got a 3.5" rubicon express super ride, I figured if there's any rubbingi would get coil spacers and shackles. I know my gas mileage is going to get slaughtered tho, so any guys that are running 32s, what kinda gas mileage are you getting? Also, if I want to regear, what gears should I go with?

 

for 32's you should run either 4.10 or 4.56 gears they are right on the line. if you want more low end power do the 4.56 and if you want "like" factory do the 4.10's