jeepkyle

i have a 1999 jeep cherokee xj with heavy duty leafs and soon to be coil springs and rancho shocks....the back used to sag so far the wheels were sitting in the wheel well....now that i fxed it i want a larger tire not sure if i want to put on a 30 or 31 inch tire...i have alot of clearence now....what is the best option for me a 30 or 31...i dont want to trim

LimitedXJAddict

I have 31x10.5's with a 3inch lift (springs and add a leaf), and had to trim the inner fender skirt to stop it from rubbing on full turn. I doubt with stock ride height even 30's would fit well. A quick google search turned up that 30's will fit, but will rub. I used to run 29x10.5 swamper tsl/sx's and they looked good and fit real well.

prerunner1982

I was able to fit 30"s with no rub, so I am gonna shoot for a 2" lift and 31"s.......eventually. It really depends on how much your original springs have sagged. I have seen pictures of XJs with 225-235s that looked like they would rub if they put a tire on a curb.

phillyxj570

somewhere on here i saw a pic of someone running a bone stock xj with 31's dont think i would go that big if stock. im running 31's on a 3 inch lift

ROK

you can run almost whatever you want with the right amount of trimming, and bumpstops. I saw a pic on here of someone with 2" BB with 37's, but from what i have found----

2" can run 30's
3" can run 31's
and if you want to cut up your ride you could go bigger

Not sure what kind of lift your running but those scenarios are a general rule of thumb with xj's

superj

if you have the 3.55 gears, i would run 30s. i have 31s on my cherokee and with the 3.55 gears, it sucks. gas mileage dropped to 10mph and i can't pass grandma on her beach cruiser anymore