30 dana front of my mj
11-29-2012, 04:26 PM
#1
Member
Thread Starter
Join Date: Jul 2011
Location: GA
Posts: 245
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1989
Model: Cherokee
Engine: V6
30 dana front of my mj
So im replacing the spider gears on my jeep comanche and i took both hubs out and found out there the same length. then i found out online that the 89 jeep comanche had a joint shaft on the passenger side leading to the spider gear in the axle. i got the front one off acourse but before i remove the carrier (spider gears) i have to get the second one out plz help on how i should do this. Picture would help GREATLY really need this asap thank you
11-29-2012, 06:53 PM
#4
Member
Thread Starter
Join Date: Jul 2011
Location: GA
Posts: 245
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1989
Model: Cherokee
Engine: V6
It turns out my arm the CAD is broken the piece you have in ur hand. looks like a pizza holder its broken. whats the name of it so i can buy a new one
11-29-2012, 08:03 PM
#5
11-29-2012, 09:10 PM
#6
CF Veteran
Join Date: Nov 2011
Location: Edmonton
Posts: 2,322
Likes: 0
Received 1 Like
on
1 Post
Year: 1990
Model: Cherokee
Engine: 4.0
or hit up the local junk yard...but then chances are the wear pads on the fork are worn out...or the bore through the fork is wallowed out...wait, yeah just buy a new one.
Thread
Thread Starter
Forum
Replies
Last Post
MidwestNick
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
10
02-28-2016 02:05 AM
studmuffin
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
09-03-2015 06:59 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)