Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here XJ (84-01)
All OEM related XJ specific tech. Examples, no start, general maintenance or anything that's stock.

3" lift question

Old Nov 7, 2009 | 10:40 PM
  #1  
x91j's Avatar
Thread Starter
CF Veteran
 
Joined: Oct 2009
Posts: 5,390
Likes: 3
From: Chicago IL
Year: 1997
Model: Cherokee
Engine: 4.0 Straigh 6
Default 3" lift question

ok so ive been looking around aloooooooot for different kind of lifts. im a college student with a very small budget and very very little jeep experience. anyways is this a decent lift? its only 214$ FROM FAT BOBS GARAGE if yes explain if no please explain thanks everyone. also will this lift be level?

Jeep Cherokee XJ 3" Front 1.5"-2" Adjustable Rear Shackles w/ Performance 8000 Series Shocks

[IMG]file:///C:/Users/admin/AppData/Local/Temp/moz-screenshot.png[/IMG]

Last edited by x91j; Nov 7, 2009 at 11:24 PM.
Reply
Old Nov 7, 2009 | 10:49 PM
  #2  
rweaver138's Avatar
CF Veteran
 
Joined: Oct 2009
Posts: 1,640
Likes: 0
From: Northeast CT
Year: 99
Model: Cherokee
Engine: 4.0
Default

website wont work
Reply
Old Nov 7, 2009 | 10:56 PM
  #3  
x91j's Avatar
Thread Starter
CF Veteran
 
Joined: Oct 2009
Posts: 5,390
Likes: 3
From: Chicago IL
Year: 1997
Model: Cherokee
Engine: 4.0 Straigh 6
Default

Sorry I'm on my blackberry right now so as soon as I get on my comp I will update the website. Sorry about that
Reply
Old Nov 8, 2009 | 12:40 AM
  #4  
sv41878's Avatar
Senior Member
 
Joined: Jun 2009
Posts: 670
Likes: 0
From: Central Pennsylvania
Year: 1989
Model: Cherokee (XJ)
Engine: 4.7 H.O.
Thumbs up

On a budget, I would say yeah.
First of all, your using shackles to lift the rear. This is a plus when compared to say an AAL system which will cause negative resistance in the springs resulting in sag and when compared to blocks, which are known to help springs snap in two. Really the only choices are new HD springs (expensive alternative), a bastard pack (which would be a cheaper lift {about $20 for S10 springs at the JY} for the rear and is option if you know how to fix a Jeep), and shackles which the kit comes with.
Second, there are 2 ways to lift the front, new coil springs which is always best but not always cheap and spacers. The only downfall to spacers is that they push the spring down the bump stop which may cause problems if you disconnect the front sway bar and hit full flex. Being that your a college kid who is looking to do this affordably, I assume your not gonna take this out and try the same things that you see the other guys (who have a second vehicle in case they break the Jeep playing). If you do plan on hardcore wheeling, look into coils springs instead. You might check into bump stop extensions too. They make them for Jeepers who run spacers.
Shocks are of Ok quality, you'd be lucky to find anything better for under 100 for the set.
The Jeep should sit level after installing the lift (use the 2 inch slot on the shackles) as the Jeep sits at a slight angle (rear is slightly higher). Again, if you have an issue here (Jeep springs are known to sag) a cheap fix would be to bastard pack the springs and drop the shackle down to the 1 1/2 slot.
You might check the web for the different parts, I know I've seen spacers for 30, shackles for 50 and there are always sales on shocks. Not to knock the price, it's not bad, but if you can save a few bucks piecing it, maybe you can afford to bastard pack it while your at it.

Last edited by sv41878; Nov 8, 2009 at 12:45 AM.
Reply
Old Nov 8, 2009 | 10:54 AM
  #5  
x91j's Avatar
Thread Starter
CF Veteran
 
Joined: Oct 2009
Posts: 5,390
Likes: 3
From: Chicago IL
Year: 1997
Model: Cherokee
Engine: 4.0 Straigh 6
Default

hey thanks a lot! now since its a 3" do i have to do anything with break lines?
Reply
Old Nov 8, 2009 | 08:27 PM
  #6  
sv41878's Avatar
Senior Member
 
Joined: Jun 2009
Posts: 670
Likes: 0
From: Central Pennsylvania
Year: 1989
Model: Cherokee (XJ)
Engine: 4.7 H.O.
Default

The only thing I did to my brake lines was pull them out of the holder on the frame, connect them up good, let the axle flex as far down as it will go (just use blocks on the frame rails and let the jack out from under the axle) and zip tied them there. Works great cuz they still stay up out of the way.
Reply
Old Nov 8, 2009 | 09:28 PM
  #7  
TheQ's Avatar
Member
 
Joined: Jun 2009
Posts: 113
Likes: 0
From: Kyle, TX
Year: 1990
Model: Cherokee
Engine: 4.0
Default

You should check out JCWhitney.com. That's where I'm gonna get mine...under 250. The brand is Rough Country. It comes with 4 shocks, 2 springs, aal, and u bolts.

Last edited by TheQ; Nov 8, 2009 at 09:36 PM.
Reply
Old Nov 8, 2009 | 10:05 PM
  #8  
x91j's Avatar
Thread Starter
CF Veteran
 
Joined: Oct 2009
Posts: 5,390
Likes: 3
From: Chicago IL
Year: 1997
Model: Cherokee
Engine: 4.0 Straigh 6
Default

Thanks a lot guys. And about the AAL how hard is it to install I have like very little car experiance
Reply
Old Nov 8, 2009 | 10:07 PM
  #9  
CRoading's Avatar
Senior Member
 
Joined: Jun 2008
Posts: 787
Likes: 0
Model: Cherokee
Default

If I have to a choose a lift with that same budget then I'll probably go with Rough Country... Guaranteed performance and you'll know that its worth it...
Reply
Old Nov 9, 2009 | 07:28 AM
  #10  
sv41878's Avatar
Senior Member
 
Joined: Jun 2009
Posts: 670
Likes: 0
From: Central Pennsylvania
Year: 1989
Model: Cherokee (XJ)
Engine: 4.7 H.O.
Default

RC kit is nice but will also make your springs sag, AAL is too rough on the stock springs.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
southfloridajeeps
Modified XJ Cherokee Tech
32
Mar 4, 2023 01:10 PM
southfloridajeeps
Modified XJ Cherokee Tech
9
Sep 5, 2015 01:30 AM
CherokeeHoonigan
Cherokee Chat
4
Sep 4, 2015 12:18 PM
Mmll52
Modified XJ Cherokee Tech
6
Sep 2, 2015 10:01 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Thread Tools
Search this Thread

All times are GMT -5. The time now is 12:31 PM.