242 rebuild question
#1
Member
Thread Starter
Join Date: Jul 2017
Location: Aurora CO
Posts: 115
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0
242 rebuild question
Question for those of you who have done a 242 transfer case rebuild...the needle bearing on the input shaft (not the one that supports the input shaft in the case but the one that supports the main shaft in the input shaft...how did you guess how far the bearing needs pressed in? Did you just eyeball it? I heard if you push it too far or not far enough then the transfer case either won't mate to the transmission properly or the end of the main shaft will not be supported properly.
Thread
Thread Starter
Forum
Replies
Last Post
greynolds17
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
04-13-2020 06:20 PM
IdiotWithASocketSet
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
5
02-08-2020 09:51 AM
Rumled
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
9
10-26-2012 12:03 PM
MNGreenXJ
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
7
01-16-2011 07:04 PM
RENIXBEAST
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
9
07-27-2010 07:09 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)