2000 XJ axle questions
#1
Junior Member
Thread Starter
Join Date: Nov 2011
Location: Colorado
Posts: 93
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2002
Model: Grand Cherokee
Engine: 4.7 V-8 and 4.0 6 cyl.
2000 XJ axle questions
my seals are leaking pretty much everywhere on the Dana 35 (I believe) axles. I don't know what to do, I am planning on installing a 4"ish lift under my XJ. The finished product will be a daily driver/hunting vehicle. Should I rebuild the axles i have and upgrade the shafts? Or should I look into a stronger axle, with maybe better pinon angles? This is not my first build i had a lifted f-150. though the options for upgrades were not a great as they are for jeeps. Thanks
#2
Senior Member
Join Date: May 2011
Location: Jackson,TN
Posts: 713
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
my seals are leaking pretty much everywhere on the Dana 35 (I believe) axles. I don't know what to do, I am planning on installing a 4"ish lift under my XJ. The finished product will be a daily driver/hunting vehicle. Should I rebuild the axles i have and upgrade the shafts? Or should I look into a stronger axle, with maybe better pinon angles? This is not my first build i had a lifted f-150. though the options for upgrades were not a great as they are for jeeps. Thanks
#3
Junior Member
Thread Starter
Join Date: Nov 2011
Location: Colorado
Posts: 93
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2002
Model: Grand Cherokee
Engine: 4.7 V-8 and 4.0 6 cyl.
Yep they are Dana 35's. thanks...any suggestions on what i should do with them?
Last edited by coloradojeepxjowner; 11-06-2011 at 05:45 PM.
#4
Senior Member
Join Date: Jun 2010
Location: Arizona
Posts: 695
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
if your not looking at spending alot i would just replace the seals. Its cheap and not to hard. You can rent all the tools from Checker auto ( Oriely ). If your looking to upgrade and have acsess to a welder i would recommend the Ford 8.8. You can pick them up at junk yards for under $200. Look for a 95 or 96 ford explorer. They have 31 spline and disc breaks. I think the gear ratio in them are 3.53's You would have to do a little research on the ratios.
The Ford 8.8 is one of the best upgrades i have done.
The Ford 8.8 is one of the best upgrades i have done.
Thread
Thread Starter
Forum
Replies
Last Post
Wybuck
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
17
01-30-2024 08:59 AM
RunnerInPink
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
25
10-10-2017 10:34 AM
(ThE NoRm!)
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
7
08-30-2015 12:10 PM
MACherokee
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
08-20-2015 01:57 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)