Hi everyone I dont know what to do anymore I changed my motor mounts and tranny mount and it seemed to work for a while now whenever I hit the gas I hear my pulley hitting the plastic fan and if I put the ac on it gets worse anyone have the same problem? I also changed the fan and it does the samething

 

Do you have a photo of this "pulley" that you can post here?

 

Was new tranny mount taller than old one ?

 

I will tru to send a picture of the pulley, I dont think its the tranny mount because it did the same thing with the old mount, its the power steering pulley

 

Here is the pictures

 

Well I just checked my fan. It does not stick out as far as yours. And I discovered that is does not turn either. Its rubbing on something and scrapes all the way around. Oh, well, another project. But it does not stick out as far as yours. I can fit my hand in the space between it and the ps pump. I dont know if being stuck has anything to do with it though.

 

By looking at your photos it looks like someone was busy working on a possible overheat problem.

Looks like a replacement electic fan (new mount screw visible) that is the wrong one.

Looks like an aftermarket radiator.

Looks like someone spliced in the lower transmission cooler hose.

Is the head new?

 

I replaced the rad and the fan, also had the motor rebuilt the head was cracked, when I replaced the fan and rad I matched it to the old ones maybe somebody put the wrong stuff in before me? Can someone take a picture of their setup?

 

On my '99, the back of the fan is flush with the back edge of the fan shroud.

 

What did you do with the old fan? Does it look like the one in the pic?

You may have to hit up the junk yard to find the proper fan.

 

Yes it was the same as the one in the picture, I guess your right im gonna go check the junk yard and get this fixed

 

Let us know how you made out.

Good luck.

 

RockAuto has a fair selection...you can get new for about 50 bucks + shipping.

 

Thanks for the site thats a good price

 

That's definitely the wrong fan in there. I can very easily put my hand between my fan and pullies (2000 also). My fan also does not come out past the shroud.