2000 cherokee no bus
11-27-2018, 02:37 PM
#1
Newbie
Thread Starter
Join Date: Nov 2018
Location: oahu, hi
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee (XJ)
Engine: 4.0L
2000 cherokee no bus
so i went wheeling and got stuck in the water it went up to about an 1in from the top of the center console, when i got it out i had a no bus issue it starts and drives just no gauges. i through a code reader on it and i have an evap code (P0448) and a pcm code (P1694), just trying to figure out if its a grounding issue or just some water got into a connector. if anyone could help me with that evap code that'd be great too!
11-27-2018, 03:38 PM
#2
Most likely the cps
https://www.naxja.org/forum/showthread.php?t=63167&highlight=p1694
as far as the p0448, maybe it's the purge valve solenoid, listen to it if it's clicking when the jeep is running, if it is than most likely it's ok and something else is an issue
https://www.naxja.org/forum/showthread.php?t=63167&highlight=p1694
as far as the p0448, maybe it's the purge valve solenoid, listen to it if it's clicking when the jeep is running, if it is than most likely it's ok and something else is an issue
Last edited by emx72; 11-27-2018 at 03:46 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Raymie Bess
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
10-18-2016 04:44 PM
Djkd20q
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
30
07-30-2016 03:53 PM
tmathews
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
13
04-06-2012 09:13 PM
djsny
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
09-18-2009 10:48 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)