Ross L

Let me elaborate so I will be in 4th gear going down road then I will go to neutral flip my blinker on and turn corner when I go to put it in second there like a wall blocking it so I try first gear and same thing. I can not put it in third because when I put it in third from neutral all it does is grind and won't work, I usually have to push clutch in go and to first, then to third, and release clutch then give it gas. It does this about once every five times tried researching it but nada so what you guys got for me.

scoob

sounds like your synchros went bad or the forks are bent

sflxj

x2

Ross L

If I got it re-geared which I am soon would this fix it most likely.

XxXJ99xX

Do you shift without the clutch most times? If you do it destroys your synchros man.

Ross L

No, I shift with the clutch all the time have never tried the "perfect shift" where you don't use clutch.

XxXJ99xX

Then it sounds like whoever did your gears screwed up your synchros and you might need new ones, did you do a complete rebuild or just replace gears/clutch?

Ross L

I have only had it for about 3 weeks but PO said he put in new clutch.

beardawg

try checking your fuild level for the clutch its right by the brake booster < and hope they put new slave cylinder in when they did the clutch it defeats the purpose of new clutch if they didnt>

XxXJ99xX

X2 and seriously dont be driving that thing without fluid. Does it smell like somethings burning when it drives or all fine?

Ross L

No it smells fine I just put carpet in but even with carpet out it just smelled like an engine inside nothing burning. My fluid is good in it. To get it in to first or second when it does not want to go I have to rev it up in neutral or with clutch in then push it in to second or first and it grinds a little bit when I do it.

Turbo X_J

More than likely as stated previously the synchronizers in the trans are trashed.

Ross L

How hard would it be to replace them? What would be cost like $250?

Turbo X_J

Easy to replace as long as you have access to a press to break down and reassemble.

Ross L

You think I would be able to get it done in a day with some help. Is this what I need to order just a different year http://cobratransmission.com/index.p...cts_id=5001005