1999 cherokee P0705, new switch, problem still exhists.
Thread Starter
Seasoned Member
Joined: Apr 2016
Posts: 327
Likes: 83
From: Pittsburgh
Year: 1999, 1996X3, 1997
Model: Cherokee (XJ)
Engine: 4.0
1999 cherokee P0705, new switch, problem still exhists.
Here is what I'm getting into...
I replaced the NSS and am still getting a MIL and the code comes right back on after being reset. No reverse lights, but starts in park and neutral. Sometimes while driving it won't shift into 4th, if I put it in neutral and turn it off and back on it will operate normally for the rest of the drive. If anyone can explain what is causing the condition I would greatly appreciate it. I'm hoping it's a wiring issue, and not a control module problem.
I replaced the NSS and am still getting a MIL and the code comes right back on after being reset. No reverse lights, but starts in park and neutral. Sometimes while driving it won't shift into 4th, if I put it in neutral and turn it off and back on it will operate normally for the rest of the drive. If anyone can explain what is causing the condition I would greatly appreciate it. I'm hoping it's a wiring issue, and not a control module problem.
Senior Member
Joined: Nov 2013
Posts: 616
Likes: 4
From: Vernon NJ
Year: 1998
Model: Cherokee
Engine: 4.0
you may just need to adjust the NSS. It may be making contact with the park and neutral circuit but not the other contacts. When I cleaned mine a few years ago it took 3 tries to adjust it correctly. I did it at night so I could see the reverse lights go on and off as I moved it.
Thread
Thread Starter
Forum
Replies
Last Post
tonywayne
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
Apr 6, 2016 02:35 PM
Vince A.S
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
7
Mar 29, 2016 12:04 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)