bpm123

1996 XJ Axle Snubber replacement
I see two different sizes for the rear axle snubbers or bump stops. They have been missing for a long time but from memory the bigger one on the passenger side is bigger than the one on the driver side. I found these two on quadratec.

Are these the correct sizes and is my memory correct on which goes where?

4.1" on passenger
https://www.quadratec.com/products/52422_01.htm
2.8" on Driver side
https://www.quadratec.com/products/52422_01.htm


example of 4.1" snubber

fb97xj1

Your second link is the same as the first. This is the correct link for is the short ones. > https://www.quadratec.com/products/52422_02.htm

Those are the factory bumpstops, the orange ones. The taller ones are for a lift.

bpm123

Thanks

downs

I don't know how I missed those orange ones when I replaced mine haha. I wound up with the tall black ones and just sawsalled them down to the right size. Little redneck but it worked. I'll have to order a set of the orange ones so I have the proper bump stops.