Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here XJ (84-01)
All OEM related XJ specific tech. Examples, no start, general maintenance or anything that's stock.

1994 jeep bucking and stalling!!!

Thread Tools
 
Search this Thread
 
Old May 4, 2011 | 05:52 PM
  #1  
1994cherokeed-rock's Avatar
Thread Starter
Newbie
 
Joined: May 2011
Posts: 5
Likes: 0
Year: 1994
Model: Cherokee
Engine: 4.0
Default 1994 jeep bucking and stalling!!!

my jeeps will start fine and run good for awhile then it well start bucking and stalling and it wont start up right away. if i wait for a few min it will start back up. but it only does it here and there seems like its geting worse. i changed the plugs wires coil distribtor am geting good fuel pressure dont know what elles to do can some one help?
Reply
Old May 4, 2011 | 06:07 PM
  #2  
freegdr's Avatar
CF Veteran
 
Joined: Mar 2010
Posts: 47,923
Likes: 38
From: Broward County Fl.
Year: 1989 xj sport 2dr
Model: Cherokee
Engine: 12 hole bosch Injectors
Default

have you checked for codes even if the light is not on,and welcome
Reply
Old May 4, 2011 | 06:16 PM
  #3  
1994cherokeed-rock's Avatar
Thread Starter
Newbie
 
Joined: May 2011
Posts: 5
Likes: 0
Year: 1994
Model: Cherokee
Engine: 4.0
Default

thanks working on a intro thread, no check engine light at anytime, but i will try to check, im thinking its the fuel pump

Last edited by 1994cherokeed-rock; May 4, 2011 at 06:21 PM.
Reply
Old May 4, 2011 | 06:20 PM
  #4  
freegdr's Avatar
CF Veteran
 
Joined: Mar 2010
Posts: 47,923
Likes: 38
From: Broward County Fl.
Year: 1989 xj sport 2dr
Model: Cherokee
Engine: 12 hole bosch Injectors
Default

you should still check for codes just because the light aint on does not mean there aint none stored key on key off method search it
Reply
Old May 4, 2011 | 06:27 PM
  #5  
1994cherokeed-rock's Avatar
Thread Starter
Newbie
 
Joined: May 2011
Posts: 5
Likes: 0
Year: 1994
Model: Cherokee
Engine: 4.0
Default

where is the obd port to pull codes on these jeeps?
Reply
Old May 7, 2011 | 05:54 PM
  #6  
1994cherokeed-rock's Avatar
Thread Starter
Newbie
 
Joined: May 2011
Posts: 5
Likes: 0
Year: 1994
Model: Cherokee
Engine: 4.0
Default bucking and stalling

where is the obd port to pull codes on these jeeps
Reply
Old May 7, 2011 | 06:14 PM
  #7  
BRUNER247's Avatar
Seasoned Member
 
Joined: Feb 2011
Posts: 262
Likes: 0
From: ankle deep in misery
Year: classified information
Model: Cherokee
Engine: .30 over 4.0
Default

Turn key on but don't start it. Turn key on then off 3 times leaving it in run position on the 3rd time. & count the cel flashes. Example code 12 will be one flash with a noticeable pause then two flashes a long pause will be between codes. 55code is end.
Reply
Old May 7, 2011 | 06:18 PM
  #8  
BRUNER247's Avatar
Seasoned Member
 
Joined: Feb 2011
Posts: 262
Likes: 0
From: ankle deep in misery
Year: classified information
Model: Cherokee
Engine: .30 over 4.0
Default

I have two but mines a 95. One by the ecm on inside drivers fender. & another underneath dash on drivers side.should be on bottom dash edge.
Reply
Old Dec 29, 2021 | 10:24 AM
  #9  
DenverB's Avatar
Newbie
 
Joined: Jun 2021
Posts: 12
Likes: 2
Model: Cherokee (XJ)
Default

Did you figure it out? My 94 XJ is now doing the exact same thing
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
zumer715
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
18
Jul 8, 2022 05:17 PM
jay_sco
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
5
Sep 10, 2015 11:42 PM
petejeep95
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
4
Aug 22, 2015 11:39 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 07:03 AM.