1993 XJ 2WD 2.5L Starter Brush Assmebly Replacement
01-17-2010, 06:09 PM
#1
Newbie
Thread Starter
Join Date: May 2009
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
1993 XJ 2WD 2.5L Starter Brush Assmebly Replacement
So, I was having a ***** of a time getting the car to start, popping the clutch worked sometimes. So I took out the starter and low and behold there was 1/4 of grime on the inside. Now I would like to replace the brushes but they seem to be mounted on a assembly. I cannot remove them all and I cannot find a new assembly. Any suggestions as to where to find one, or how to replace the brushes without replacing the assembly?
Below are photos of the following:
Starter Brush Assembly assembled
Starter Brush Assembly disassembled
Welded bracket with brushes from the top
Welded bracket with brushes from the bottom
Below are photos of the following:
Starter Brush Assembly assembled
Starter Brush Assembly disassembled
Welded bracket with brushes from the top
Welded bracket with brushes from the bottom
Thread
Thread Starter
Forum
Replies
Last Post
seansr
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
12
11-15-2022 06:08 AM
Zeke P. Lucas
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
08-30-2015 05:42 PM
jghaenlein
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
8
08-27-2015 07:07 AM
Zerocyde
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
5
08-24-2015 10:56 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)