My Jeep stalled out after sitting a few months. It ran fine for 30 miles and quit on me. I've run a spark test to rule that out. Fuel relay works fine, checked both the filter and fuel pump and everything works fine. I'm seeing plenty of pressure pouring from the unhooked filter when I turn the key. I'm getting zero pressure under the hood though when I do a pressure test.
It seems as though there is a something going on between the fuel filter output and engine. I know that sounds weird, but it's all I got. I was considering unhooking the fuel filter and running air in the lines from under the hood and just before the filter to blow any potential clog out. any ideas?

 

did you disconect the line at the fuel rail and see if its getting that far