Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here XJ (84-01)
All OEM related XJ specific tech. Examples, no start, general maintenance or anything that's stock.

1986 ignition switch

Thread Tools
 
Search this Thread
 
Old Jul 3, 2010 | 01:41 PM
  #1  
powermike's Avatar
Thread Starter
Newbie
 
Joined: Jun 2010
Posts: 6
Likes: 0
From: miami florida
Year: 1986
Model: Cherokee
Engine: 2.8l v6 carb
Default 1986 ignition switch

hello all i have a 1986 Cherokee and when i bought it it was running fine last week however on the highway my turn signals,wind shield wipers, radio and ac all went out at the same time. so i first thought of fuses checked them all they are all fine next i thought a main relay no difference after changing it so i was fumbling around and turned the key all the way back and eureka! it all came back on however it will not work unless the key is turned all the way back so i figure it must be the ignition switch. well what i want to know is the location of the ignition switch and how to get to it. and if possible if you guys have videoes or pictures. Thank you guys in advance for any help
Reply
Old Jul 3, 2010 | 10:59 PM
  #2  
Bustedback's Avatar
CF Veteran
 
Joined: Feb 2010
Posts: 12,367
Likes: 23
From: Oroville, CA
Year: 1995
Model: Grand Cherokee
Engine: 4.0 with all of the noise and clatter
Default

There is an adjustment for the ignition switch, the switch is located on the steering column down by the brake pedal. Only two small cap screws hold the switch on.
Reply
Old Jul 3, 2010 | 11:26 PM
  #3  
kbad's Avatar
Member
 
Joined: May 2010
Posts: 155
Likes: 0
From: southlake, TX
Year: 1996 Sport
Model: Cherokee
Engine: 4.0L H.O.
Default

x2...ignition switch on steering column....take it off and check the sliding contacts....old ones eventually disintegrate causing short/bad contact....if the contacts/plastic is shot, you may have to visit jy and pick one up...good luck!
Reply
Old Jul 4, 2010 | 09:55 PM
  #4  
powermike's Avatar
Thread Starter
Newbie
 
Joined: Jun 2010
Posts: 6
Likes: 0
From: miami florida
Year: 1986
Model: Cherokee
Engine: 2.8l v6 carb
Default

thank you so much guys
Reply
Old Jul 4, 2010 | 10:31 PM
  #5  
Bustedback's Avatar
CF Veteran
 
Joined: Feb 2010
Posts: 12,367
Likes: 23
From: Oroville, CA
Year: 1995
Model: Grand Cherokee
Engine: 4.0 with all of the noise and clatter
Default

A brand new switch will set you back about 20 bucks from any parts house.
Reply
Old Jul 6, 2010 | 05:29 PM
  #6  
powermike's Avatar
Thread Starter
Newbie
 
Joined: Jun 2010
Posts: 6
Likes: 0
From: miami florida
Year: 1986
Model: Cherokee
Engine: 2.8l v6 carb
Default

actually it set me back 13 bucks not bad this is why i have always loved jeeps the parts are cheap in price but not in quality
Reply
Old Jul 6, 2010 | 06:12 PM
  #7  
sonja's Avatar
Newbie
 
Joined: Jul 2010
Posts: 1
Likes: 0
Year: 1997
Model: Grand Cherokee
Engine: 4.0 6 cylinder
Talking maybe my problem too?

ok, i've been having starting problems.

ok, i've been trying to figure out whats wrong with my car. '97 jeep grand cherokee laredo 4x4 6 cylinder.
started out car not starting, didn't respond to jump start. starts randomly. decide to change the starter, its due. starts fine, next day, no start again. so, i replace the starter relay too. again- starts, then next day, same- starts randomly.
so, i figure it must have been the battery all along. i use my warranty and replace the battery. AGAIN, no start.

you think my last look is my ignition switch? should have been my first!
Reply
Old Jul 12, 2010 | 03:27 PM
  #8  
powermike's Avatar
Thread Starter
Newbie
 
Joined: Jun 2010
Posts: 6
Likes: 0
From: miami florida
Year: 1986
Model: Cherokee
Engine: 2.8l v6 carb
Default

hey buddy before you go replaceing that ignition switch do me one favor first go back and make shure all your battery cables are tightened second check your terminals if its neither one of those than yeah replace your ignition switch
Reply
Old Jul 12, 2010 | 03:31 PM
  #9  
TrekkerJmm's Avatar
"CF Moderator"
 
Joined: Sep 2008
Posts: 3,045
Likes: 3
From: N.J. Shore Area
Year: 1994
Model: Cherokee
Engine: l6 HO
Default

Originally Posted by Bustedback
A brand new switch will set you back about 20 bucks from any parts house.
Got mine for $12.99 from AZone last week...Tj
Reply
Old Jul 27, 2010 | 12:33 AM
  #10  
powermike's Avatar
Thread Starter
Newbie
 
Joined: Jun 2010
Posts: 6
Likes: 0
From: miami florida
Year: 1986
Model: Cherokee
Engine: 2.8l v6 carb
Default

wow so i finally had time to do it i got sick of the south florida heat it was not easy but i fixed it
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
ZJBeachRunnerGC
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
18
Mar 10, 2021 05:52 PM
riparianbarbarian
Introductions
3
Oct 23, 2015 03:57 PM
Stabsthedrama
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
15
Oct 3, 2015 05:46 PM
Jeremy Millner
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
10
Oct 2, 2015 02:21 PM
Joshuapn
Other Vehicles. Other Jeep models & cars and trucks of other makes
1
Sep 25, 2015 08:16 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 08:42 AM.