WTB[MidAtl]: front drive shaft
Junior Member
Joined: Mar 2015
Posts: 71
Likes: 0
From: Breinigsville, PA
Year: 1996
Model: Cherokee
Engine: 4.0
if you are doing it underneath unbolt the exhaust at the bottom of the manifold and let it hang alot more room to turn a wrench and when you are assembling it use whichever type of fluid you are putting back in it on the mating surfaces where the bearings sit it will slide into place easier also before you really get into it when you take the front driveshaft off remember to break the nut that holds the yoke on so its easy to get off if you take it out
Thread Starter
Senior Member
Joined: Jul 2015
Posts: 563
Likes: 2
From: Southern Maryland
Year: 1993
Engine: 4.0
if you are doing it underneath unbolt the exhaust at the bottom of the manifold and let it hang alot more room to turn a wrench and when you are assembling it use whichever type of fluid you are putting back in it on the mating surfaces where the bearings sit it will slide into place easier also before you really get into it when you take the front driveshaft off remember to break the nut that holds the yoke on so its easy to get off if you take it out
Thread
Thread Starter
Forum
Replies
Last Post
avanbaggett
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
9
Sep 22, 2021 10:44 PM
CherokeeKing87
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
Feb 7, 2016 02:03 PM
Cory Culver
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
Feb 2, 2016 05:30 PM
P2120
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
12
Feb 1, 2016 06:32 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)