CF Veteran
i just threw two in the trash.. woops lol. if you have a really hard time finding one which you shouldnt.. there is a junk yard close to me with a few. dyt ohio
Quote:
Originally Posted by LongArmXJ
i just threw two in the trash.. woops lol. if you have a really hard time finding one which you shouldnt.. there is a junk yard close to me with a few. dyt ohio
Just my luck.....
Seasoned Member
Well I have Dana 30 3.55 geared that I'd sell ya for 100 bucks and I'm in Ohio 30 mins away from richmond ind thanks James
Quote:
OK, if I can't find one closer I'll get yours, you aren't all that far away, I'm an hour from Richmond. I really don't want to swap them but no choice, the pinion bearing is shot and someone broke the pin bolt...and drilled it right through the pin too. I'll let you know in a couple days.Originally Posted by jccherokee92
Well I have Dana 30 3.55 geared that I'd sell ya for 100 bucks and I'm in Ohio 30 mins away from richmond ind thanks James
Thanks!
Quote:
Yeah wish I were going but no go as the toy is down. Needs rear springs and it;s ready to go. I tore it up down there in June.Originally Posted by jccherokee92
Ok that's fine just let me know I'm going to haspin acres this sat thanks
Seasoned Member
What do u need for the rear b/c I have a set of leaf springs if this other guy doesn't buy them
For that Jeep I just need rear springs, stock or 3" lift. If I get stock I'll get a set of S10 or Durango springs to toss in with them. Seems I may have a line on some Durango springs anyway as someone I know just trashed his mothers Durango.....
Junior Member
I got a HP 30 not sure on the ratio as it's at work but it is tore down and freshly painted have new axle seals for it but never got around to putting it together. long story short thought my housing was bent but wasn't so don't need it $125 in fishers IN. Got everything out to the calipers.
Quote:
Ok, well, I may just get that as a spare. I'm just getting ready to head over to Ohio for the one he has and the springs for my other one.Originally Posted by TCScustoms
I got a HP 30 not sure on the ratio as it's at work but it is tore down and freshly painted have new axle seals for it but never got around to putting it together. long story short thought my housing was bent but wasn't so don't need it $125 in fishers IN. Got everything out to the calipers.
