all parts from a 91 xj
all parts are local pick up only and is in Bradley Il 60915
free parts will be scarped sunday if not spoken for i need the room

90% of the interior panels (most can be seen in pics to follow)
rear seat
door panels
arm rest
grab handles (above door)

the following parts i will get pics of and pull this weekend if someone shows actual interest

D30 (said to be locked by PO have not had time to check not sure of gearing)

matching rear i forgot if its a 8.25 or D35 will check in 20 mins

NP 231
and Trans

all worked fine before i shut it down no noise or anything

front, rear , TC, Trans 100 each
some parts im keeping alot im not ask if you need anything not listed

 

Are you selling any body panels? If so what color is the Cherokee?

 

Also, if the front axle doesnt have the disconnect, really is locked and 3:55 gears I'll make the trip

 

the front i beleive does have the disconnect ill double check it in a few minutes
ill take my camera with me and post pics

depends on the body panel
hood and doors im keeping for now

hatch we can work something out on

front fenders ill say free if you want to come get them
they are trimed already most would rather trim to suit them

color is black rattle can from the looks of it
was a marron color orginally

 

Id like to hear more about the d30

 

Hey I know huntingman is lookin for a center console

 

ok front




rear


not great pics but the best i could get with the limited room in the garage at the moment

 

Did you see if it was a disconnect axle?

 

thats the disconnect shown in the crapy second photo

 

center console is available has a lose hinge tho not sure if hinge is bad or screws are loose or striped will have to look tomorrow

 

The picture shows sway bar disconnects. I think what afm is askin about is the vacuum actuated disconnect for a 2 piece axle. It's used in the pre 93 Cherokee Dana 30

 

i dont know of any vacuum disconnects after 91
from my under standing the vacuum disconnect high pinion dana 30 ran from 84-91 at which time it changed to the non disconnect high pinion D30 from 92-99 and then to low pinion D30 for 00-01
feel free to correct me if im wrong

what is shown in the pic isnt a sway bar disconnect
on the side shown in the pic you can see 2 wire terminals if you look closely with the wires cut on the side nearest the center of the axle it has hose hook ups one hose seem to run to the radiator the other i didnt have time to look at close and track

 

Plus the upper control arm mount is cast, gauranteeing it is a CAD D30...If it has a locker and its a lunchbox style and you'd ship it, i might be interested in just the locker, let me know how much you want for it. Thanks

 

any tail lights? are those red and clear ones in the first picture?

 

I would like the passenger front oh ***** handle. How much to 87111? And is there any chance you have the interior spare tire holder?

Thanks

Jason