A~Pillar Light Brackets are now available for your ZJ!





The ZJ brackets are self-positioning and shipped primered ready for your top coat, mounting hardware is also included. A large base is provided waiting to accept virtually any light once installed, install time is about 20 minutes.



Due to the ZJ's tight mounting area, we're mounting the brackets with self drilling/self tapping stainless steel #8 screws, 4 per bracket. All thats required is a power drill and a phillips bit to install, they even self position.



Cost is the same as our other A~Pillar Brackets; $47.50 SHIPPED..

Feel free to pm me here or call the shop if you have intrest, paypay/visa/master/amex are all acceptable.

Here's a quick overview of the install, it's so easy a cave man could do it.....

Open your door, gently pull your A~Pillar weather stripping away from the pillar and locate the 2nd trim screw working from the bottom up, remove screw...


This hole is now the first attaching point for your bracket, place bracket over the existing hole & drive the provided stainless steel screw into the hole to a snug fit..


Repeat this and continue to insert and set the 2 remaining 'side' fastening points with screws provided. Besure the bracket sits tight to the A~Pillar as you apply the screws. Tighten these '3' screws firmly.

You are now ready to drive your final screw, the last screw gets driven thru the 'top' of the bracket.


Reinstall your weather stripping and start wiring up your lights, you're done!

WORD OF CAUTION, PLEASE USE CARE WHEN WORKING NEAR YOUR WINDSHIED, take your time.....one slip and WHOOPS!!

This item will also work on WJ's, you will need to alter, trim the secondary weather strip for them to fit, see picture below-


Thanks for looking!!
.
.
.
.

 

i need a pair

 

I would really like a set. I'll be sending you a PM after payday

 

I will be here.

 

are these still for sale?

 

Absolutely.

 

pm sent

 

Returned with info.

 

We no longer suggest or will sell this item for 'WJ' models, it seems the tolerance is too tight and the width of the factory windshield can vary just enough to make these brackets unfriendly. ZJ's only, thanks for reading!
.
=

 

Have a set coming! Can't wait. I'll post pics after install also deciding on what what lights to get

 

Will this work on a JK by any chance?

 

They came! Installing tomorrow!

 

Pretty sure they won't work on a jk because they mount differently I think.

 

Look great! Had to steal the kc driving lights off my bumper so now the bumper looks a little bare. Guess it's time for a set of fogs on my bumper

 

Looking good Malibu...
Won't work on KJ/JK/KK/ or Special K........Sorry!