A~Pillar Light Brackets (XJ)
CF Veteran
Joined: Feb 2009
Posts: 3,270
Likes: 0
From: Genoa, IL
Year: 1999
Model: Cherokee
Engine: 4.0L
Yeah pretty sure Mark already makes them. There is also this awesome thing called a search option
https://www.cherokeeforum.com/f10/zj...ilable-137845/
Thread Starter
Cherokee Forum Vendor
Joined: Feb 2010
Posts: 737
Likes: 2
From: Black Diamond Foothills, KY.
Year: Multi
Model: Cherokee
Glad you like them...
Actually working on yet another decal design as we speak, decal and T-Shirt design, have'nt offered T-Shirts for years.....I know I need some! lol....
Thread Starter
Cherokee Forum Vendor
Joined: Feb 2010
Posts: 737
Likes: 2
From: Black Diamond Foothills, KY.
Year: Multi
Model: Cherokee
Newbie
Joined: May 2012
Posts: 16
Likes: 0
Model: Cherokee
mounting position on A-Pillar
is there a limit as to how low you could mount these babies on an XJ's A-pillars ? seems most of the pix i've seen so far have them mounted about 4" or so up (significantly above level of mirrors) and i may like to put 'em lower , or closer to level of mirrors if possible .... would there be interference with fully opening hood if mounts & lights are too low ?
Last edited by tsx500; Aug 14, 2012 at 06:38 PM. Reason: forgot something
MJ>XJ
Joined: Mar 2009
Posts: 17,836
Likes: 7
From: Griffin, G.A.
Year: 1990
Model: Comanche
Engine: 4.0 I6
no i dont think the hood will come anywhere close... i liked the look better on the MJ above... however its harder to get the nuts on if you drill low near the dash on the back side... then again you could use SS self tapping bolts like i did and mount the anywhere from top to bottom and you dont have to pull the trim on the inside and try to put a nut on it or any of that... and i put o rings between the bracket and a pillar to seal water from getting in... only had to RTV the wires...
CF Veteran
Joined: Oct 2011
Posts: 1,812
Likes: 0
From: South Mills, NC
Year: 1998
Model: Cherokee
Engine: Rebuilt 4.0L I6
Originally Posted by luckyAD80
Can anyone tell me exactly how they wired everything and where the wires all run? Explain it like I'm five years old.
Senior Member
Joined: Dec 2011
Posts: 690
Likes: 2
From: VA
Year: 2001
Model: Cherokee
Engine: 6 cyl
Originally Posted by ccooper1234
You drill 3 holes in the a-pillar, 2 for the bolts to mount the bracket and one to run the wires thru the a-pillar. You wire the wires like any other light. After you have them all wired up put silicone in the hole for the wires.
Thread Starter
Cherokee Forum Vendor
Joined: Feb 2010
Posts: 737
Likes: 2
From: Black Diamond Foothills, KY.
Year: Multi
Model: Cherokee
Pretty easy, most come with instructions, positive/negative wire....if unsure, bench wire them first so you know you have the wires correct & light them up, then simply do it on the vehical, typically everything is color coded.....