My recommended catalytic converters
Junior Member
Joined: Dec 2012
Posts: 42
Likes: 0
From: where the army send me currently Bamberg, Germany
Year: 1999, 2000
Model: Cherokee
Engine: 4.0L I6
Hey, I just placed my order for the Magnaflow exhaust with tailpipe. Which HIGH FLOW cat would I need to oreder from you that would work best with the exhaust I ordered? I have a 99 XJ 4.0. Thanks. Just figured since im redoing the exhaust might as well put in a better cat to while im at it.
Thread Starter
Former Sponsor
Joined: Feb 2010
Posts: 474
Likes: 0
From: Roanoke VA
Year: 1995
Model: Grand Cherokee
Engine: 4.0L
CF Veteran
Joined: Feb 2011
Posts: 3,500
Likes: 0
From: Long Beach, Ca
Year: 2000
Model: Cherokee
Engine: 4.0 I6
Member
Joined: May 2010
Posts: 198
Likes: 0
From: Portland OR
Year: 96
Model: Cherokee
Engine: 4 liter
Regarding part 608226 for a 96 XJ, the inlet and outlet sizes are 2.25", but the downpipe going in is 2.5".
Do I need an adapter to fit it or do you have ones that are 2.5 in 2.25 out?
Do I need an adapter to fit it or do you have ones that are 2.5 in 2.25 out?
Member
Joined: May 2010
Posts: 198
Likes: 0
From: Portland OR
Year: 96
Model: Cherokee
Engine: 4 liter
Sorry got things backwards.
I meant the inlet/outlets or the 608226 are 2.5" and this will be going to a 2.25" Flowmaster.
What would be required to make this work with out tons of "labor" added from the shop that'll be doing the welding? I'm assuming some sort of adapter or something. I know nothing about exhaust lol.
I meant the inlet/outlets or the 608226 are 2.5" and this will be going to a 2.25" Flowmaster.
What would be required to make this work with out tons of "labor" added from the shop that'll be doing the welding? I'm assuming some sort of adapter or something. I know nothing about exhaust lol.
Thread Starter
Former Sponsor
Joined: Feb 2010
Posts: 474
Likes: 0
From: Roanoke VA
Year: 1995
Model: Grand Cherokee
Engine: 4.0L
http://www.magnaflow.com/SALES/02cat...irectfit=93207
http://www.magnaflow.com/SALES/02cat...rectfit=447190
Sorry got things backwards.
I meant the inlet/outlets or the 608226 are 2.5" and this will be going to a 2.25" Flowmaster.
What would be required to make this work with out tons of "labor" added from the shop that'll be doing the welding? I'm assuming some sort of adapter or something. I know nothing about exhaust lol.
I meant the inlet/outlets or the 608226 are 2.5" and this will be going to a 2.25" Flowmaster.
What would be required to make this work with out tons of "labor" added from the shop that'll be doing the welding? I'm assuming some sort of adapter or something. I know nothing about exhaust lol.
Member
Joined: Oct 2012
Posts: 165
Likes: 0
From: SE Michigan
Year: 2000
Model: Cherokee
Engine: 4.6L Stroker
This may sound like a strange question, but do you make your exhaust components or are you just a retailer? I ask only cuase I am very cramped for space and would really like a Cat with an outlet pipe 90 degrees to the inlet pipe rather than one that flows straight thru. I could add a 90 on the end, but it doesn't fit nearly as well as if the pipe took a turn and exited out the side-body of the cat rather than the end.
Thanks.
Thanks.