Jeep Cherokee XJ Front Bumper
Junior Member
Joined: Jun 2011
Posts: 119
Likes: 0
From: Ft. Meade, Maryland
Year: 1991
Model: Cherokee
Engine: 4.0l
I was pretty anxious too when he built mine and it took 11 weeks to get it but I assure you it is well worth the wait. The product is extremely well designed and a way better deal than anything on the market.
Seasoned Member

Joined: Aug 2013
Posts: 452
Likes: 3
From: Duluth, MN
Year: 1999
Model: Cherokee
Engine: 4.0 I6
Couple questions for those who have been using this bumper;
How did you mount your fairlead for your winch? Just buy a winch mount I'm guessing?
And how many bolts are needed to install? And what grade would you recommend?
How did you mount your fairlead for your winch? Just buy a winch mount I'm guessing?
And how many bolts are needed to install? And what grade would you recommend?
CF Veteran
Joined: Apr 2011
Posts: 14,553
Likes: 1
From: Carrollton, GA
Year: 1994
Model: Cherokee
Engine: Inline 6 4.0L High Output
I used 12 bolts, 6 per side. Steering box is 7/16 14 4" Grade 8. Same for passenger side except a smaller bolt, like a 2" long one i think. I reused the metric hardware sizes for the 3 original bumper mounts. They're like a M8x1.5 (I think) or longer and then the appropriate size washers and nuts.
Junior Member
Joined: Jun 2011
Posts: 119
Likes: 0
From: Ft. Meade, Maryland
Year: 1991
Model: Cherokee
Engine: 4.0l
https://www.ballisticfabrication.com...e.asp?#page-65
Ballistic fab generic winch plate, it's around $50
I got the kit from Leonard and it has G8 hardware. Saves the time to go to hardware store.
Seasoned Member

Joined: Aug 2013
Posts: 452
Likes: 3
From: Duluth, MN
Year: 1999
Model: Cherokee
Engine: 4.0 I6
Thread Starter
Banned
Joined: Apr 2009
Posts: 599
Likes: 0
From: Mt.Airy NC
Year: 1998
Model: Cherokee
Engine: 4.0
Guys im trying to get back with everyone fast as I can I have a lot of orders going out Friday. Thanks for all the orders and sorry for the long waits.
Seasoned Member

Joined: Aug 2013
Posts: 452
Likes: 3
From: Duluth, MN
Year: 1999
Model: Cherokee
Engine: 4.0 I6
I'll take some pics of my winch set up in a little bit. Most winch platforms have the same mounting feet design, so depending on what you have i would make a similar fairlead mount to mine out of 1/4" or bigger and plate the underside as well. I cut my grille and all so i could push the winch back as far as possible.
I used 12 bolts, 6 per side. Steering box is 7/16 14 4" Grade 8. Same for passenger side except a smaller bolt, like a 2" long one i think. I reused the metric hardware sizes for the 3 original bumper mounts. They're like a M8x1.5 (I think) or longer and then the appropriate size washers and nuts.
I used 12 bolts, 6 per side. Steering box is 7/16 14 4" Grade 8. Same for passenger side except a smaller bolt, like a 2" long one i think. I reused the metric hardware sizes for the 3 original bumper mounts. They're like a M8x1.5 (I think) or longer and then the appropriate size washers and nuts.





never again. great bumper if you don't mind waiting 4 months. great bumper bad business. imo