When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
morning cruiser,on mine the back line goes to intake in front of throttle body and the front goes to air box.a few days ago started getting a couple drops under the front drivers side,thought power steering?then yesterday while working on my list of to do's i take out airbox to get to headlight conn. to clean it and discover my leak is oil seeping out of box.it has allways had a little in it but its worse now.why so much blowby?looking at the diagram i think my lines are right.oh, by the way thanks for the video!really nice.
been fixing a few things. the 3-way conn. that goes to oxegen sensor is beyond repair,napa says about 25.00 is that a fair price?
in that last picture you can see the crappy wires to the left of the nice oil gathering pan.was going to splice and shrink,but connector is pretty iffy.
in that last picture you can see the crappy wires to the left of the nice oil gathering pan.was going to splice and shrink,but connector is pretty iffy.
See if dorman carries it, the coolant temp sensor should be same as a injector connector if that needs replacement.
morning cruiser,on mine the back line goes to intake in front of throttle body and the front goes to air box.a few days ago started getting a couple drops under the front drivers side,thought power steering?then yesterday while working on my list of to do's i take out airbox to get to headlight conn. to clean it and discover my leak is oil seeping out of box.it has allways had a little in it but its worse now.why so much blowby?looking at the diagram i think my lines are right.oh, by the way thanks for the video!really nice.
been fixing a few things. the 3-way conn. that goes to oxegen sensor is beyond repair,napa says about 25.00 is that a fair price?
Exactly where is your MAP sensor vacuum source connected and where is the line from the rear of the valve cover connected to..
All this jury rigging can contribute to the oil in the air cleaner issue.
rear line on valve cover goes to intake in front of throttle body
yes i have read 25 now.i have a little tapping going on in there too.need someone that knows what to look at before i get into that.have not dug that far yet.still doing alot of refreshing.working on the list.since you mentioned the map,when i check A +B terms, key on,i get 3 volt.running i get 0.A+C terms,key on,i get 4 volt.haynes book says 5,2,5.dont have vacuum tester yet, our napa is crap, so cant check that.thanks.
rear line on valve cover goes to intake in front of throttle body
yes i have read 25 now.i have a little tapping going on in there too.need someone that knows what to look at before i get into that.have not dug that far yet.still doing alot of refreshing.working on the list.since you mentioned the map,when i check A +B terms, key on,i get 3 volt.running i get 0.A+C terms,key on,i get 4 volt.haynes book says 5,2,5.dont have vacuum tester yet, our napa is crap, so cant check that.thanks.
03-04-2015, 07:38 AM
