95 zj, 5.2 Intake Manifold Gasket
#1
Newbie
Thread Starter
Join Date: Aug 2014
Location: Dumas, Tx
Posts: 26
Likes: 0
Received 1 Like
on
1 Post
Year: 1995
Model: Grand Cherokee
Engine: 5.2L
95 zj, 5.2 Intake Manifold Gasket
I am about to fix a leak from my Intake. What I need to know is what gaskets will I need to replace this and the other part I have to take off. Also is there any special tools.
#2
CF Veteran
Join Date: Feb 2010
Location: Oroville, CA
Posts: 12,367
Likes: 0
Received 19 Likes
on
18 Posts
Year: 1995
Model: Grand Cherokee
Engine: 4.0 with all of the noise and clatter
Just an intake gasket set, the plenum plate gasket, and the water pump bypass hose. You will want a torque wrench when you install the manifold. The spec is 12 foot pounds, or 144 inch pounds. DO NOT OVER TORQUE THE MANIFOLD! Over torquing will lead to cam bearing failure and possibly crack the block. It's not really a tough job, just time consuming.
#4
CF Veteran
Join Date: Feb 2010
Location: Oroville, CA
Posts: 12,367
Likes: 0
Received 19 Likes
on
18 Posts
Year: 1995
Model: Grand Cherokee
Engine: 4.0 with all of the noise and clatter
If they're not leaking you don't have to worry about the valve covers. But it's up to you if you want to do them.
#5
Old fart with a wrench
On some engines, the lip of the valve covers hang over the edge of the intake manifold. (I'm thinking Chevy small block) This might interfere with removing the manifold or replacing it without disturbing the new gasket. I guess the Dodge 5.2 isn't like this.
Thread
Thread Starter
Forum
Replies
Last Post
cpnwrench
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
13
02-15-2024 08:09 AM
Blue94xj
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
20
04-16-2023 10:20 AM
64dodge
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
3
09-30-2015 05:50 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)