98 XJ Build
Thread Starter
Member
Joined: Dec 2019
Posts: 168
Likes: 23
From: Ut
Year: 1998
Model: Cherokee (XJ)
Engine: 4.0
It's OEM crossmember and the shocks are the RC ones that came with the lift. I'm already thinking of going 5100's and different rear springs with custom made shackle boxes. I'll see after adding the bumper/ spare tire weight and my fuel tank skid.
Thread Starter
Member
Joined: Dec 2019
Posts: 168
Likes: 23
From: Ut
Year: 1998
Model: Cherokee (XJ)
Engine: 4.0
The one in the picture has the later rear cast housing on it so it is re used. The earlier ones have kinda like fins on it. That kind need to have a new housing added.
Senior Member


Joined: Feb 2011
Posts: 664
Likes: 29
From: Arizona
Year: 1996
Model: Cherokee
Engine: 4.0
Any new updates on your ride? I was able to get both of the middle pieces of the frame stiffeners on and most of the rosettes welded. What a pain! Now that those are on, I have a crack in the frame near the steering box and will weld that. Then I need to get my ac serviced so I can drive it around more. I then need to work on my lift. I need new shocks and bump stops for inside the coils for the front. As for the rear I am not sure if I NEED new shackles? Can I use the OEM ones? I am not trying to get more lift with them since I am adding new leaf's. What do you think?
Last edited by xjallseasons; May 28, 2021 at 06:06 PM. Reason: wanted to add something else
Thread Starter
Member
Joined: Dec 2019
Posts: 168
Likes: 23
From: Ut
Year: 1998
Model: Cherokee (XJ)
Engine: 4.0
Any new updates on your ride? I was able to get both of the middle pieces of the frame stiffeners on and most of the rosettes welded. What a pain! Now that those are on, I have a crack in the frame near the steering box and will weld that. Then I need to get my ac serviced so I can drive it around more. I then need to work on my lift. I need new shocks and bump stops for inside the coils for the front. As for the rear I am not sure if I NEED new shackles? Can I use the OEM ones? I am not trying to get more lift with them since I am adding new leaf's. What do you think?
Thread Starter
Member
Joined: Dec 2019
Posts: 168
Likes: 23
From: Ut
Year: 1998
Model: Cherokee (XJ)
Engine: 4.0
Newbie

Joined: Feb 2023
Posts: 11
Likes: 5
From: Reno, NV
Year: 1998
Model: Cherokee (XJ)
Engine: 4.0L
As a new xj owner and new member to this forum, i just spent the last 2 hours reading this build. Fantastic work & very inspiring! I'm also admiring the quality humans commenting compared to other forums.
Senior Member


Joined: Feb 2011
Posts: 664
Likes: 29
From: Arizona
Year: 1996
Model: Cherokee
Engine: 4.0
Thread Starter
Member
Joined: Dec 2019
Posts: 168
Likes: 23
From: Ut
Year: 1998
Model: Cherokee (XJ)
Engine: 4.0
Seasoned Member

Joined: Mar 2015
Posts: 473
Likes: 8
From: Oregon
Year: 2000
Model: Cherokee (XJ)
Engine: 4.0 I6
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



