hey guys,

I have a jeep chrokee 4.0L 2001 with a Lunati Camshift and GTP cylinder head stage 2.
what is the best high performance oil pump and water pump for my Jeep?

thanks

 

26 views and no answers ....... COME ON !

 

There really aren't any for our motors. Sorry.

 

here you go:

http://www.meziere.com/displaycatego...44,352,336,171

but for example, i run a stock cooling system (i.e. stock radiator, stock water pump, stock overflow and radiator cap, stock thermostat elbow w180* stat) the only mods i have are a HD fan clutch i got from a 98 jeep grand cherokee and a 180* duralast stat. my jeep never sees over 200* in normal every day traffic it idles and drives at 180*-185* and under load (AKA offroading) it sees between 190*-200* all day. the 180 stat and the HD fan clutch is the best thing i ever did for my jeep

 

I live in Saudi arabia and it is around 55 degrees celsius = 130 fahrenheit . i assure you that i can cook an egg on the street ... So imagine that hot weather with these new parts. That is why i asked for a high performance pumps...... it sound crazy, don't you think?

 

so are you saying there really isnt much differance from any high performance water & oil pumps from say quadratec or summitracing vs the ones you can buy at autozone? im looking for an upgrade from the stock pumps? im going to be running a mild cam, upgraded injectors (784's) bored TB, new exhaust, 99+ intake manifold, APN exhaust manifold. so i want something stronger then stock but nothing extreme. any thoughts opinions etc would be greatly appreciated! thanks

 

Melling makes a high oil flow pump. Just watch for crank/pump interference. Had to take the dremel to mine to give the crank enough room

 

hesco high flow pump. make sure you get a high flow tstat to go with it
http://www.flowkoolerwaterpumps.com/...161/index.html

 

great reccomendation!! gave them a call and they were super helpful and led me in the right direction to the water pump and tstat that was best for my setup, thanks!

 

what option did you go with through melling that you ran into clearance issues?? for after market support they offer: cast iron, performance, aluminum. also with the setup i plan on running: upgraded injectors (784s) APN exhaust manifol, 99+ intake manifold upgrade, comp cams custom cam, bored TB, cowl snorkel cold air intake setup, new exhaust which option would be the best setup for me?

also i see mopar makes a high performance oil pump does anyone have any experience with theres?

 

It was cast. I had two options, the standard one and the high flow that I bought.

 

did you order it online, or call them? did they notify you about this issue? or was it unkown until you went to install? did you notify them of the issue afterwardS? i just wanna make sure i get the right application and have it be completely bolt in based on lack of time to install.

 

is the HD fan clutch you speak of from a ZJ, the same as the taures fan upgrade? if so it the zj upgrade easier/harder?

 

Fan clutch is a Napa 272310.

 

i have a brand new high volume oil pump for sell. shipping to saudi arabia would be expensive