Jeep Cherokee Forum
used Permatex "The Right Stuff" to hold them on from underneath.
used Permatex "The Right Stuff" to hold them on from underneath.
0 2010/11/14 05:38:57
diagram for the measuring the cuts
diagram for the measuring the cuts
1 2010/11/14 05:38:57
Also used it on the taillight housings and the third brake light. Used 2 coats front and rear and then 1 coat of clearcoat.
Also used it on the taillight housings and the third brake light. Used 2 coats front and rear and then 1 coat of clearcoat.
1 2010/03/28 21:00:41
used some VHT Nightshades on the front markers and blinkers to darken them up.
used some VHT Nightshades on the front markers and blinkers to darken them up.
1 2010/03/28 21:00:41
Update to the wish list....rear tire carrier is on!
Update to the wish list....rear tire carrier is on!
0 2010/03/13 18:26:02
not a bad way to spend about $2000 on a Jeep. Next comes a rear tire carrier from detoursusa.com and then rock rails.
not a bad way to spend about $2000 on a Jeep. Next comes a rear tire carrier from detoursusa.com and then rock rails.
0 2010/01/30 18:51:25
Got a hi-lift off of craigslist as well. rather than spending $60 for the mounting brackets I went to Home Depot and spent $15 to get 4 brackets, bolts, nuts, and 8 washers to work the exact same way.
Got a hi-lift off of craigslist as well. rather than spending $60 for the mounting brackets I went to Home Depot and spent $15 to get 4 brackets, bolts, nuts, and 8 washers to work the exact same way.
1 2010/01/30 18:51:25
I'm pretty happy with how it's turned out so far.
I'm pretty happy with how it's turned out so far.
0 2010/01/30 18:51:25
spent good amount of time making the lights' wiring be very clean.
spent good amount of time making the lights' wiring be very clean.
1 2010/01/30 18:51:25
found a new intake on Craiglist
found a new intake on Craiglist
1 2010/01/30 18:47:16
snagged some badges off a '91 Laredo to replace the factory sticker ones
snagged some badges off a '91 Laredo to replace the factory sticker ones
0 2010/01/30 18:47:16
a brush guard and lights definitely helped the look of the front end
a brush guard and lights definitely helped the look of the front end
0 2010/01/30 18:47:16
found a set of locking Yakima bars at the pick-n-pull for $13
found a set of locking Yakima bars at the pick-n-pull for $13
0 2010/01/30 18:47:16
traded my stock rims and tires for a basket and lights
traded my stock rims and tires for a basket and lights
0 2010/01/30 18:47:16
Was finally able to get a 3" lift from Rusty's a year after buying the XJ.
Was finally able to get a 3" lift from Rusty's a year after buying the XJ.
0 2010/01/30 18:42:38
Got a set of ZJ Canyons at the local pick-n-pull. Wrapped 'em with 31" BFG's.
Got a set of ZJ Canyons at the local pick-n-pull. Wrapped 'em with 31" BFG's.
0 2010/01/30 18:42:38
All the trim was faded so I taped off the doors and repainted the side trim and the bumper caps.
All the trim was faded so I taped off the doors and repainted the side trim and the bumper caps.
2 2010/01/30 18:42:38
Immediately put on a hitch to both pull and get pulled out.
Immediately put on a hitch to both pull and get pulled out.
0 2010/01/30 18:42:38
Bought it bone stock in early '08 with 113k on it. Not a bad $3200.
Bought it bone stock in early '08 with 113k on it. Not a bad $3200.
0 2010/01/30 18:42:38
IMG 0101
IMG 0101
8 2011/09/24 08:09:00
IMG 0079
IMG 0079
0 2011/09/24 08:08:12
IMG 0034
IMG 0034
0 2011/09/24 08:05:19
IMG 0047
IMG 0047
0 2011/09/24 08:00:26
IMG 0044
IMG 0044
0 2011/09/24 08:00:26
IMG 0040
IMG 0040
0 2011/09/24 08:00:26
IMG 0039
IMG 0039
0 2011/09/24 08:00:26
IMG 0036
IMG 0036
0 2011/09/24 08:00:26
IMG 0068
IMG 0068
0 2011/09/24 07:58:30
IMG 0067
IMG 0067
0 2011/09/24 07:58:30
IMG 0064
IMG 0064
0 2011/09/24 07:58:30
IMG 0055
IMG 0055
0 2011/09/24 07:58:30
IMG 0051
IMG 0051
0 2011/09/24 07:58:30
IMG 0030
IMG 0030
0 2011/09/24 07:47:56
IMG 0028
IMG 0028
0 2011/09/24 07:47:56
About 1/2 your rear view is eaten up but it's worth it in my opinion.
About 1/2 your rear view is eaten up but it's worth it in my opinion.
0 2010/03/13 18:22:47
I think the vertical setup for the tire looks better than it being angled with the window, but you can get either from detours at no extra charge.
I think the vertical setup for the tire looks better than it being angled with the window, but you can get either from detours at no extra charge.
0 2010/03/13 18:22:47
The finished product. All that's left is to buy a couple of d-rings and a matching BFG A/T.
The finished product. All that's left is to buy a couple of d-rings and a matching BFG A/T.
0 2010/03/13 18:16:30
Once the lock and tire mount are on all that's left is to put the bumper caps and spare on.
Once the lock and tire mount are on all that's left is to put the bumper caps and spare on.
0 2010/03/13 18:16:30
After drilling 9 holes (4 left, 5 right) through the bumper, the lower brackets bolt over it and into lower cross member, sandwiching the bumper between them. The left bracket has the greasable swing arm pinion and the left has the arm lock waiting to be attached.
After drilling 9 holes (4 left, 5 right) through the bumper, the lower brackets bolt over it and into lower cross member, sandwiching the bumper between them. The left bracket has the greasable swing arm pinion and the left has the arm lock waiting to be attached.
0 2010/03/13 18:16:30
The bumper fits right over the lower cross member and ends up about 1/8" closer to the body than factory. The only way you can tell is when you look closely at the bumper caps.
The bumper fits right over the lower cross member and ends up about 1/8" closer to the body than factory. The only way you can tell is when you look closely at the bumper caps.
0 2010/03/13 18:16:30