Jeep Cherokee Forum
adapter fabrication
adapter fabrication
0 2016/11/14 08:49:48
Mocking up front seats
Mocking up front seats
0 2016/11/14 08:49:05
XJ bench on top of JKU bench assembly
XJ bench on top of JKU bench assembly
0 2016/11/14 08:48:14
0 2016/11/14 08:47:17
0 2016/11/14 06:18:06
0 2016/11/14 06:17:52
0 2016/11/14 06:17:40
0 2016/11/14 06:17:21
bracket and slide bolted together
bracket and slide bolted together
0 2016/11/14 06:16:22
0 2016/11/14 06:15:18
0 2016/11/14 06:15:05
0 2016/11/14 06:14:48
0 2016/11/14 06:13:38
Full JKU seat install complete. Approximately 20hrs of work. Welding, drilling, fabrication, paint
Full JKU seat install complete. Approximately 20hrs of work. Welding, drilling, fabrication, paint
0 2016/11/14 06:12:37
Rear view.
Rear view.
0 2016/11/14 06:11:57
Folds almost flat. Could be folded flat if you wanted to remove the cross braces the factory seat sits on.
Folds almost flat. Could be folded flat if you wanted to remove the cross braces the factory seat sits on.
0 2016/11/14 06:11:10
Passenger seat bracket bolted up. 2" offset off center, 1" back from center give or take. Moved away from the transmission tunnel for fit.
Passenger seat bracket bolted up. 2" offset off center, 1" back from center give or take. Moved away from the transmission tunnel for fit.
0 2016/11/14 06:09:13
Finished and painted
Finished and painted
0 2016/11/14 06:08:51
bottom view showing the factory slide bracket.
bottom view showing the factory slide bracket.
0 2016/11/14 06:08:16
Welded in adaptor
Welded in adaptor
0 2016/11/14 06:07:53
0 2016/11/10 11:31:08
0 2016/11/10 11:30:32
0 2016/11/10 11:29:36
0 2016/11/10 11:29:10
0 2016/11/04 05:53:54
0 2016/10/31 06:25:12
0 2016/10/31 06:24:50
0 2016/10/31 06:24:28
0 2016/10/31 06:24:08
Upper profile looking down.
Upper profile looking down.
0 2016/10/27 07:22:42
Upper mounting points bolted down.
Upper mounting points bolted down.
0 2016/10/27 07:22:06
Front view
Front view
0 2016/10/27 07:21:46
Side profile of lower JKU bench
Side profile of lower JKU bench
0 2016/10/27 07:21:12
I ended up deciding the bench was up too high. Will need to make modifications to lower it a couple of inches.
I ended up deciding the bench was up too high. Will need to make modifications to lower it a couple of inches.
0 2016/10/27 07:20:23
Upper bolts mounting plates for the rear JKU bench
Upper bolts mounting plates for the rear JKU bench
0 2016/10/27 07:19:50
0 2016/10/24 06:22:01
Rear bench is a good fit. Not sure about the fold flat feature. SHould at least be fold almost flat when I'm done.
Rear bench is a good fit. Not sure about the fold flat feature. SHould at least be fold almost flat when I'm done.
0 2016/10/24 05:43:26
Front passenger seat mocked up. Tight fit.
Front passenger seat mocked up. Tight fit.
0 2016/10/24 05:42:48
6 bolts and some reinforcement under the jeep to get this mounted.
6 bolts and some reinforcement under the jeep to get this mounted.
0 2016/10/24 05:42:12
xj Seat on top of JKU rear bench. Almost a perfect match.
xj Seat on top of JKU rear bench. Almost a perfect match.
0 2016/10/24 05:41:33