Jeep Cherokee Forum
0 2017/01/26 07:16:08
0 2017/01/26 07:15:44
0 2017/01/23 07:33:12
0 2017/01/23 07:32:56
0 2017/01/23 07:32:16
0 2017/01/23 07:32:00
0 2017/01/23 07:31:50
Side veiw. I think it may need tucked in another half inch.
Side veiw. I think it may need tucked in another half inch.
0 2017/01/23 07:30:48
main beam and sides test fit and mock up.
main beam and sides test fit and mock up.
0 2017/01/23 07:30:14
Quarter inch main beam cut for recessed pillars into the box steel. "test fit"
Quarter inch main beam cut for recessed pillars into the box steel. "test fit"
0 2017/01/23 07:29:30
all the parts together mock up and test fit
all the parts together mock up and test fit
0 2017/01/23 07:28:58
Test fitting
Test fitting
0 2017/01/23 07:28:35
Pillars fabbed and tacked to brackets.
Pillars fabbed and tacked to brackets.
0 2017/01/23 07:27:57
0 2017/01/20 06:25:01
0 2017/01/20 06:24:44
0 2017/01/20 06:24:20
0 2017/01/11 08:54:05
0 2016/12/05 08:22:16
Final coat of paint. I couldn't find any black, and still had two cans of the gun metal I used on the wheels over 2 years ago.
Final coat of paint. I couldn't find any black, and still had two cans of the gun metal I used on the wheels over 2 years ago.
0 2016/12/01 07:35:29
0 2016/12/01 07:34:52
Yielded about 3/4" of lift in the middle hole.
Yielded about 3/4" of lift in the middle hole.
0 2016/12/01 07:34:01
Test fit. Much better....
Test fit. Much better....
0 2016/12/01 07:33:28
All the holes drilled, brackets trimmed, and the unibody rail brackets fabricated.
All the holes drilled, brackets trimmed, and the unibody rail brackets fabricated.
0 2016/12/01 07:32:38
0 2016/11/30 07:23:41
0 2016/11/30 07:23:23
Home brew SRB's started.
Home brew SRB's started.
0 2016/11/30 07:22:44
Installed extended rear brake line. (factory CJ7 line) 5" longer
Installed extended rear brake line. (factory CJ7 line) 5" longer
0 2016/11/30 07:21:36
Painting done on passenger side, and ready for the trimmed flares.
Painting done on passenger side, and ready for the trimmed flares.
0 2016/11/30 07:20:58
Finished the tuck and fold and fender and quarter trimming.
Finished the tuck and fold and fender and quarter trimming.
0 2016/11/30 07:20:16
0 2016/11/17 11:47:07
0 2016/11/17 11:46:55
0 2016/11/15 05:47:21
0 2016/11/15 05:47:00
Seats completed. Rear headrests removed for visibility.
Seats completed. Rear headrests removed for visibility.
0 2016/11/14 09:02:47
Functioning fold flat feature *almost folds flat.
Functioning fold flat feature *almost folds flat.
0 2016/11/14 09:01:58
0 2016/11/14 09:01:28
6 half inch grade 8 hardware, with reinforcement plates under the unibody. Cut center section for the seat to sit level and weld lowering plate with angle.
6 half inch grade 8 hardware, with reinforcement plates under the unibody. Cut center section for the seat to sit level and weld lowering plate with angle.
0 2016/11/14 09:00:19
Back seat view
Back seat view
0 2016/11/14 08:59:50
0 2016/11/14 08:55:06
finished adapter with factory 1994 slide mechanisms
finished adapter with factory 1994 slide mechanisms
0 2016/11/14 08:50:34