Jeep Cherokee Forum
I cut it all square, bent it all straight and rivoted it in.
I cut it all square, bent it all straight and rivoted it in.
0 2016/03/11 20:46:46
tin snips and a board for a straight edge/form brake and I'm in business
tin snips and a board for a straight edge/form brake and I'm in business
0 2016/03/11 20:46:45
this stuff was 10$ from a local repurpose store and i could always take this out and weld in proper sheet later.
this stuff was 10$ from a local repurpose store and i could always take this out and weld in proper sheet later.
0 2016/03/11 20:46:43
this is the material I used for the floor pans, it's aluminum roofing
this is the material I used for the floor pans, it's aluminum roofing
0 2016/03/11 20:46:42
0 2016/03/11 20:46:41
0 2016/03/11 20:46:40
the tools i used to do the floorpans
the tools i used to do the floorpans
0 2016/03/11 20:46:39
I broke one of the tranny mount bolts, this shows the top of it
I broke one of the tranny mount bolts, this shows the top of it
0 2016/03/11 20:46:38
luckily the rails are not rusted
luckily the rails are not rusted
0 2016/03/11 20:46:37
0 2016/03/11 20:46:37
the only thing left original is the tunnel
the only thing left original is the tunnel
0 2016/03/11 20:46:36
I left the tranny tunnel intact
I left the tranny tunnel intact
0 2016/03/11 20:46:34
both sides cut completely out
both sides cut completely out
0 2016/03/11 20:46:34
started cutting it all out
started cutting it all out
0 2016/03/11 20:46:32
a bunch of rust flakes in the rails
a bunch of rust flakes in the rails
0 2016/03/11 20:46:31
pass side floorpan is rusted away
pass side floorpan is rusted away
0 2016/03/11 20:46:30
back by the leaf mount
back by the leaf mount
0 2016/03/11 20:46:29
the rust was all the way through
the rust was all the way through
0 2016/03/11 20:46:28
did the same to the top rails
did the same to the top rails
0 2016/03/11 20:39:57
I cut and rivoted daimond plate after cutting out and rustproofing the rust holes.
I cut and rivoted daimond plate after cutting out and rustproofing the rust holes.
0 2016/03/11 20:39:57
235/75 15 with procomps all new
235/75 15 with procomps all new
0 2016/03/11 20:39:56
the roofrack is made of steel pipe and concrete mesh
the roofrack is made of steel pipe and concrete mesh
0 2016/03/11 20:39:55
0 2016/03/11 20:39:54
0 2016/03/11 20:39:54
starting to look like a decent XJ.
starting to look like a decent XJ.
0 2016/03/11 20:39:53
rotor marks lined up
rotor marks lined up
0 2016/03/11 20:03:00
0 2016/03/11 20:02:59
0 2016/03/11 20:02:58
0 2016/03/11 20:02:57
0 2016/03/11 20:02:56
New rims/Tires
New rims/Tires
0 2016/03/11 20:02:55
made a roof rack
made a roof rack
0 2016/03/11 20:02:54
still waiting on rockers, might weld in 2x6 rock sliders if i can find em
still waiting on rockers, might weld in 2x6 rock sliders if i can find em
0 2016/03/11 20:02:53
plated the top after rust proofing
plated the top after rust proofing
0 2016/03/11 20:02:52
roof rack, tires,rims and plated
roof rack, tires,rims and plated
0 2016/03/11 20:02:51
sanded the hole and mixed resin to fill
sanded the hole and mixed resin to fill
0 2016/03/11 20:02:50
someone broke into it by smashing into the fibre glass with a hammer
someone broke into it by smashing into the fibre glass with a hammer
0 2016/03/11 20:02:49
0 2016/03/11 20:02:49
Tools used for floorpans and diamondplate
Tools used for floorpans and diamondplate
0 2016/03/11 20:02:48
0 2016/03/11 20:02:47