Jeep Cherokee Forum
0 2023/03/12 13:29:09
Spraying raptor was super easy and fun!
Spraying raptor was super easy and fun!
0 2023/03/12 13:29:02
Forgot to take a picture of these with primer, but
Forgot to take a picture of these with primer, but
0 2023/03/12 13:28:55
Prep
Prep
0 2023/03/12 13:28:09
Sandblasting the inside of my old steel bumper
Sandblasting the inside of my old steel bumper
0 2023/03/12 13:28:01
0 2023/03/05 17:24:10
0 2023/03/05 17:24:04
I used U-Pol’s Raptor primer and a cheapie Harbor Freight spray gun for this job
I used U-Pol’s Raptor primer and a cheapie Harbor Freight spray gun for this job
0 2023/03/05 17:23:59
My garage unfortunately isn’t heated, making paint work in the winter a bit more difficult. I used a kerosene heater to heat up the area before I shot primer.
My garage unfortunately isn’t heated, making paint work in the winter a bit more difficult. I used a kerosene heater to heat up the area before I shot primer.
0 2023/03/05 17:23:54
0 2023/03/05 17:23:48
I owe it to my girlfriend for helping me get the tape lines razor straight. She’s got an eye for it!
I owe it to my girlfriend for helping me get the tape lines razor straight. She’s got an eye for it!
0 2023/03/05 17:23:42
0 2023/01/20 12:27:30
Oops!
Oops!
0 2023/01/20 12:26:42
0 2023/01/16 16:16:42
Not impressed with this clearance the the control arm. I may need to get a custom downpipe in the near future.
Not impressed with this clearance the the control arm. I may need to get a custom downpipe in the near future.
0 2023/01/16 16:16:33
New O2 sensor installed on new downpipe
New O2 sensor installed on new downpipe
0 2023/01/16 16:16:26
While doing this job I noticed I’ve been losing brake fluid though the proportion valve. It reminded me that I
While doing this job I noticed I’ve been losing brake fluid though the proportion valve. It reminded me that I
0 2023/01/03 19:37:34
Intake reinstalled
Intake reinstalled
0 2023/01/03 19:37:29
Installing a new exhaust mani. I had this sitting on a shelf for 2 years. If I’m not mistaken, the large springs welded to the tubes are designed to dampen/redistribute the vibration that causes that cracking issue.
Installing a new exhaust mani. I had this sitting on a shelf for 2 years. If I’m not mistaken, the large springs welded to the tubes are designed to dampen/redistribute the vibration that causes that cracking issue.
0 2023/01/03 19:37:23
Replaced the motor mount while I was in here. This is the result of the engine sagging for months while the transmission was removed.
Replaced the motor mount while I was in here. This is the result of the engine sagging for months while the transmission was removed.
0 2023/01/03 19:32:10
Mounting surface clean
Mounting surface clean
0 2023/01/03 19:32:03
And the infamous crack at the collector
And the infamous crack at the collector
0 2022/12/14 13:58:26
Intake and exhaust manifold removed
Intake and exhaust manifold removed
0 2022/12/14 13:58:13
0 2022/12/14 13:58:02
0 2022/12/14 13:57:52
And here’s the infamous crack at the collector
And here’s the infamous crack at the collector
0 2022/12/14 07:54:44
Intake and header removed
Intake and header removed
0 2022/12/14 07:54:37
0 2022/12/14 07:54:29
0 2022/12/14 07:54:21
Note the classic crack @ the collector
Note the classic crack @ the collector
0 2022/12/09 19:42:07
Intake and header removed
Intake and header removed
0 2022/12/09 19:42:01
0 2022/12/09 19:41:53
0 2022/11/26 04:14:43
0 2022/10/19 10:45:56
0 2022/10/19 10:45:47
0 2022/10/19 10:45:37
0 2022/09/22 08:06:39
0 2022/09/22 08:06:29
0 2022/09/20 19:06:36
Daytime running lights
Daytime running lights
0 2022/09/20 19:06:30