Jeep Cherokee Forum
0 2017/12/11 12:13:17
0 2018/01/28 19:36:42
0 2018/01/28 19:40:31
0 2018/01/30 06:49:05
0 2018/01/30 06:49:19
0 2018/01/30 06:49:32
0 2018/01/30 06:49:45
0 2018/02/10 07:45:32
0 2018/02/10 07:45:43
0 2018/06/25 15:27:53
0 2018/06/25 15:29:10
So I took an emergency trip to the junkyard and came out with a decent used electric fan from a 98 XJ. My buddy also gave me a fan shroud off his parts Jeep. After painting them, I installed both. I even put some dielectric grease in the fan connector. I started the Jeep and let it idle all the way up to operating temp (210), but I noticed the electric fan never came on. Don’t know if it’s supposed to kick on when the engine is under more load/higher than normal temp?
So I took an emergency trip to the junkyard and came out with a decent used electric fan from a 98 XJ. My buddy also gave me a fan shroud off his parts Jeep. After painting them, I installed both. I even put some dielectric grease in the fan connector. I started the Jeep and let it idle all the way up to operating temp (210), but I noticed the electric fan never came on. Don’t know if it’s supposed to kick on when the engine is under more load/higher than normal temp?
0 2018/06/26 20:02:11
0 2018/07/01 17:34:35
0 2018/07/01 17:39:05
0 2018/07/08 17:36:05
0 2018/07/08 17:37:02
0 2018/07/08 17:41:13
0 2018/07/08 17:44:19
0 2018/07/29 11:59:43
0 2018/07/29 11:59:45
0 2018/07/29 11:59:47
0 2018/07/29 11:59:51
0 2018/07/29 12:11:43
0 2018/07/31 07:59:44
0 2018/07/31 07:59:45
0 2018/07/31 08:55:39
0 2018/07/31 08:55:39
0 2018/07/31 09:03:17
0 2018/07/31 09:03:18
0 2018/07/31 09:04:54
0 2018/07/31 09:05:57
0 2018/07/31 10:01:42
This was a few months after I added the black flares, as you can tell by the fluffy white stuff in the background.
This was a few months after I added the black flares, as you can tell by the fluffy white stuff in the background.
0 2018/07/31 10:03:22
0 2018/07/31 10:20:06
I replaced these switches on both sides trying to fix the power lock problem, but they didn't work until after I got my Jeep back from the shop the second time.
I replaced these switches on both sides trying to fix the power lock problem, but they didn't work until after I got my Jeep back from the shop the second time.
0 2018/07/31 10:20:07
0 2018/07/31 10:53:50
All torn apart
All torn apart
0 2018/07/31 10:53:50
The ball joint press setup
The ball joint press setup
0 2018/07/31 10:53:52
New u-joints installed, axles ready to go in
New u-joints installed, axles ready to go in
0 2018/07/31 10:53:54
A view of the replacement bolt in the track bar bracket
A view of the replacement bolt in the track bar bracket
0 2018/07/31 11:01:36