Jeep Cherokee Forum
0 2018/06/28 09:28:40
0 2018/06/28 09:28:52
0 2018/06/28 21:32:26
0 2018/06/28 22:52:51
Close-up of the latch mechanism rods. The have a simple “L” bend to them, with little plastic caps that fit into holes on the latch mechanism.
Close-up of the latch mechanism rods. The have a simple “L” bend to them, with little plastic caps that fit into holes on the latch mechanism.
0 2018/06/29 07:06:39
Here are the rest of the door panel connections; 2 Blue Plugs “A” and “B,” and the Latch Mechanism connection rods.
Here are the rest of the door panel connections; 2 Blue Plugs “A” and “B,” and the Latch Mechanism connection rods.
0 2018/06/29 07:09:33
Close-up of the latch mechanism on the backside )inside) of the door panel. The plastic cap shown in the previous photo fits into the upper hole here.
Close-up of the latch mechanism on the backside )inside) of the door panel. The plastic cap shown in the previous photo fits into the upper hole here.
0 2018/06/29 07:19:30
0 2018/06/29 21:22:35
0 2018/06/29 21:22:39
0 2018/06/29 21:25:00
0 2018/06/29 21:25:04
0 2018/06/29 21:26:25
0 2018/06/30 16:13:45
0 2018/06/30 16:14:24
0 2018/06/30 16:15:14
0 2018/06/30 16:16:00
0 2018/06/30 16:21:20
0 2018/06/30 16:22:17
0 2019/06/21 15:31:59
0 2019/06/21 15:32:03
0 2019/06/21 15:41:43
0 2019/06/21 15:41:51
0 2019/06/21 15:41:58
I got this heavy-ass angle of steel from the scrap pile at work.
I got this heavy-ass angle of steel from the scrap pile at work.
0 2019/06/23 12:48:04
It’s a li’l long. I’ll cut the end off.
It’s a li’l long. I’ll cut the end off.
0 2019/06/23 12:48:10
Here’s the piece I cut off. I’m using it to help bend other pieces.
Here’s the piece I cut off. I’m using it to help bend other pieces.
0 2019/06/23 12:48:16
Here’s the front seat support/crossmember with holes for the seat and frame.
Here’s the front seat support/crossmember with holes for the seat and frame.
0 2019/06/23 17:33:30
Here is the seat mount, and some washers I made to go under the frame. I don’t want these bolts yanking through the frame.
Here is the seat mount, and some washers I made to go under the frame. I don’t want these bolts yanking through the frame.
0 2019/06/23 17:33:37
Here’s the extra piece I cut off. I’ll use it later for other stuff.
Here’s the extra piece I cut off. I’ll use it later for other stuff.
0 2019/06/23 17:33:43
0 2019/07/13 22:22:11
0 2019/07/13 22:22:17
0 2019/07/13 22:22:23
0 2019/07/14 17:03:02
0 2019/07/14 17:03:08
0 2019/07/14 17:03:14
0 2019/07/14 17:03:20
I’m pretty sure the taillight had a plug that mated with the wiring bundle. Why did somebody cut this bundle of wires?
I’m pretty sure the taillight had a plug that mated with the wiring bundle. Why did somebody cut this bundle of wires?
0 2019/07/16 21:49:02
0 2019/07/16 21:49:09
0 2019/07/16 21:49:16
0 2019/07/16 21:49:22