Jeep Cherokee Forum
0 2016/06/20 16:58:55
The screws that come with the handles are M4-.70 x 25mm. That's much too long for this modification. I went and bought some M4-.70 x 8mm machine screws, oval head phillips.
The screws that come with the handles are M4-.70 x 25mm. That's much too long for this modification. I went and bought some M4-.70 x 8mm machine screws, oval head phillips.
0 2016/06/20 16:59:00
Dimensions: Hole Centers/Spacing: 6-5/16" (160mm) Length: 8-11/16" Width: 3/8" Bar Diameter: 3/8" Projection: 1-1/4"
Dimensions: Hole Centers/Spacing: 6-5/16" (160mm) Length: 8-11/16" Width: 3/8" Bar Diameter: 3/8" Projection: 1-1/4"
0 2016/06/20 17:02:51
The screws that come with the handles are M4-.70 x 25mm. That is too long for this modification. I bought some M4-.70 x 8mm, oval head machine screws.
The screws that come with the handles are M4-.70 x 25mm. That is too long for this modification. I bought some M4-.70 x 8mm, oval head machine screws.
0 2016/06/20 17:03:01
0 2016/06/20 17:03:07
0 2016/06/20 17:03:10
0 2016/06/20 17:03:14
0 2016/06/20 17:03:18
0 2016/06/20 17:03:21
Dimensions: Hole Centers/Spacing: 6-5/16" (160mm) Length: 8-11/16" Width: 3/8" Bar Diameter: 3/8" Projection: 1-1/4"
Dimensions: Hole Centers/Spacing: 6-5/16" (160mm) Length: 8-11/16" Width: 3/8" Bar Diameter: 3/8" Projection: 1-1/4"
0 2016/06/20 17:05:01
The screws that come with the handles are M4-.70 x 25mm. That is too long for this modification. I bought some M4-.70 x 8mm, oval head machine screws.
The screws that come with the handles are M4-.70 x 25mm. That is too long for this modification. I bought some M4-.70 x 8mm, oval head machine screws.
0 2016/06/20 17:05:13
Dimensions: Hole Centers/Spacing: 6-5/16" (160mm) Length: 8-11/16" Width: 3/8" Bar Diameter: 3/8" Projection: 1-1/4"
Dimensions: Hole Centers/Spacing: 6-5/16" (160mm) Length: 8-11/16" Width: 3/8" Bar Diameter: 3/8" Projection: 1-1/4"
0 2016/06/20 17:05:49
0 2016/06/20 17:09:16
The screws that are included with the handles are M4-.70 x 25mm. They are too long to use in the modification. I bought M4-.70 x 8mm, oval head machine screws.
The screws that are included with the handles are M4-.70 x 25mm. They are too long to use in the modification. I bought M4-.70 x 8mm, oval head machine screws.
0 2016/06/20 17:10:54
0 2016/06/20 17:12:15
The screws don't stick out very far on the back side of the center console trim.
The screws don't stick out very far on the back side of the center console trim.
0 2016/06/20 17:12:24
0 2016/06/20 17:12:28
There is plenty enough clearance between the lower handle and my 8-ball shift knob.
There is plenty enough clearance between the lower handle and my 8-ball shift knob.
0 2016/06/20 17:12:32
Turned out pretty good for only spending less than $20 total.
Turned out pretty good for only spending less than $20 total.
0 2016/06/20 17:12:36
New 5778 Timken pinion seal and 3 new 5-153X Spicer u joints.
New 5778 Timken pinion seal and 3 new 5-153X Spicer u joints.
0 2016/06/22 15:03:05
Throttle body removed from Dat Jeep.
Throttle body removed from Dat Jeep.
0 2016/06/22 16:08:44
Not that dirty, but I cleaned it anyway with some brake cleaner.
Not that dirty, but I cleaned it anyway with some brake cleaner.
0 2016/06/22 16:08:49
Old sensor, some carbon build-up. It doesn't move very easily.
Old sensor, some carbon build-up. It doesn't move very easily.
0 2016/06/22 16:08:54
New sensor vs. old sensor, obviously the new sensor moves much easier.
New sensor vs. old sensor, obviously the new sensor moves much easier.
0 2016/06/22 16:08:58
All installed and "cleaned".
All installed and "cleaned".
0 2016/06/22 16:09:02
Idle reading before I changed the IAC.
Idle reading before I changed the IAC.
0 2016/06/22 16:11:07
Idle 1 week after changing the IAC.
Idle 1 week after changing the IAC.
0 2016/06/22 16:11:13
0 2016/06/22 16:14:15
0 2016/06/22 16:14:20
0 2016/06/22 16:14:24
0 2016/06/22 16:14:28
0 2016/06/22 16:14:32
Before I changed the IAC.
Before I changed the IAC.
0 2016/06/22 16:14:48
1 week after I changed the IAC.
1 week after I changed the IAC.
0 2016/06/22 16:14:56
0 2016/06/23 16:46:18
0 2016/06/23 16:46:27
0 2016/06/23 16:46:32
0 2016/06/23 16:46:39
0 2016/06/23 16:46:45
0 2016/06/23 16:46:50