Jeep Cherokee Forum
Dat glare though.
Dat glare though.
0 2016/05/01 18:30:29
Sprayed with rubberized undercoating.
Sprayed with rubberized undercoating.
0 2016/05/01 18:30:51
After a few hours of dry time.
After a few hours of dry time.
0 2016/05/01 18:30:59
Light test - substantially less glare, but tolerable.
Light test - substantially less glare, but tolerable.
0 2016/05/01 18:31:03
0 2016/05/06 18:26:27
0 2016/05/06 18:26:39
0 2016/05/06 18:26:45
0 2016/05/06 18:26:50
Old fluid - looks more like chocolate milk than Ps fluid Ran new fluid out through return line until fluid ran clean. Steering seems tighter, if that is possible.
Old fluid - looks more like chocolate milk than Ps fluid Ran new fluid out through return line until fluid ran clean. Steering seems tighter, if that is possible.
0 2016/05/07 16:14:30
I only have mounted the cooler, the install will be coming soon - waiting on parts.
I only have mounted the cooler, the install will be coming soon - waiting on parts.
0 2016/05/07 16:18:36
Shot of the cooler through the front grille.
Shot of the cooler through the front grille.
0 2016/05/07 16:18:51
Cut my transmission return line after the radiator and spliced in the aftermarket aluminum transmission cooler.
Cut my transmission return line after the radiator and spliced in the aftermarket aluminum transmission cooler.
0 2016/05/08 14:45:36
Also swapped out the bulky OEM shift solenoids for the smaller replacement solenoids. The green solenoid is the replacement and the other bulky ones are the OEM.
Also swapped out the bulky OEM shift solenoids for the smaller replacement solenoids. The green solenoid is the replacement and the other bulky ones are the OEM.
0 2016/05/08 14:45:44
0 2016/05/08 16:42:04
0 2016/05/10 17:22:48
0 2016/05/10 17:22:55
0 2016/05/10 17:23:01
0 2016/05/10 17:23:08
0 2016/05/10 17:23:13
0 2016/05/10 17:23:22
0 2016/05/10 17:23:33
0 2016/05/10 17:23:43
0 2016/05/10 17:23:49
0 2016/05/10 17:24:24
0 2016/05/10 17:24:29
0 2016/05/10 18:07:59
0 2016/05/11 15:15:28
0 2016/05/11 15:15:35
0 2016/05/11 15:15:43
0 2016/05/11 15:15:48
0 2016/05/11 15:15:52
0 2016/05/11 15:15:57
Yes I do have a safety pressure relief valve and shutoff switch mounted to my custom made manifold. From left to right: 300 psi pressure gauge, 1/4 npt plug, 150 psi pressure relief valve, 90 psi on & 120 psi off shutoff switch and finally a in-line pressure regulator and water separator.
Yes I do have a safety pressure relief valve and shutoff switch mounted to my custom made manifold. From left to right: 300 psi pressure gauge, 1/4 npt plug, 150 psi pressure relief valve, 90 psi on & 120 psi off shutoff switch and finally a in-line pressure regulator and water separator.
0 2016/05/11 15:37:51
0 2016/05/14 13:36:25
0 2016/05/14 13:36:33
0 2016/05/14 13:36:39
0 2016/05/14 13:37:07
0 2016/05/14 13:37:12
0 2016/05/14 13:37:17
0 2016/05/14 13:37:21