Jeep Cherokee Forum
This is the speaker test mounted, I had them in and out about 5 times changing them to how I wanted them. I changed the door panel carpet to black. I also had issues with the included grills (I put a hole in the rubber surround and got a warrenty replacement).
This is the speaker test mounted, I had them in and out about 5 times changing them to how I wanted them. I changed the door panel carpet to black. I also had issues with the included grills (I put a hole in the rubber surround and got a warrenty replacement).
0 2016/10/04 08:10:24
Playing with tweeter locations
Playing with tweeter locations
0 2016/10/04 08:10:37
Passenger side tweeter pod.
Passenger side tweeter pod.
0 2016/10/04 08:10:44
Cut the crap out of the fenders and welding them back together
Cut the crap out of the fenders and welding them back together
0 2016/10/04 08:10:53
Making tweeter pods for the sail panel.
Making tweeter pods for the sail panel.
0 2016/10/04 08:11:04
This is the tweeter pod covered in a shirt and fiberglass resin
This is the tweeter pod covered in a shirt and fiberglass resin
0 2016/10/04 08:11:20
Covered in carpet for now. I don't really like it but it will work for now.
Covered in carpet for now. I don't really like it but it will work for now.
0 2016/10/04 08:11:26
Drivers side
Drivers side
0 2016/10/04 08:11:37
Basically done door. Still needs a little cleaning.
Basically done door. Still needs a little cleaning.
0 2016/10/04 08:22:43
0 2016/10/15 14:34:13
Looking at the new and improve clearance.
Looking at the new and improve clearance.
0 2016/10/19 16:43:13
Final sanding a body prep.
Final sanding a body prep.
0 2016/10/19 16:43:18
In primer
In primer
0 2016/10/19 16:43:24
In color.
In color.
0 2016/10/19 16:43:28
Changing all the wheel studs as the last ones were to short.
Changing all the wheel studs as the last ones were to short.
0 2016/10/19 16:43:32
Found some rust.
Found some rust.
0 2016/10/19 16:43:35
And where it is now.
And where it is now.
0 2016/10/19 16:43:41
After
After
0 2016/10/24 15:32:33
Before
Before
0 2016/10/24 15:32:39
Black lug nuts
Black lug nuts
0 2016/10/24 15:32:48
0 2016/10/27 05:58:21
Tucking in the center
Tucking in the center
0 2016/10/31 19:50:33
Very close to the rear of the fender
Very close to the rear of the fender
0 2016/10/31 19:50:37
Very close to the fender, I may trim it.
Very close to the fender, I may trim it.
0 2016/10/31 19:50:40
0 2016/10/31 19:50:46
0 2016/10/31 19:50:49
Took it offroad and just a bought everything scrapped.
Took it offroad and just a bought everything scrapped.
0 2016/12/06 10:32:25
Put a good dent in the factory skid
Put a good dent in the factory skid
0 2016/12/06 10:32:30
I got rid of my duralast battery because it was junk. I know Optimas are not the best any more but I had to get it though AutoZone as where my other battery was from there.
I got rid of my duralast battery because it was junk. I know Optimas are not the best any more but I had to get it though AutoZone as where my other battery was from there.
0 2016/12/06 10:32:36
Cleaned up the wiring some. I flex loomed 99% of the wires and remounted the relays and made it simpler.I would like a relay box that is waterproof but this is what it is for now. I also did the fan switch mod.
Cleaned up the wiring some. I flex loomed 99% of the wires and remounted the relays and made it simpler.I would like a relay box that is waterproof but this is what it is for now. I also did the fan switch mod.
0 2016/12/06 10:32:42
0 2016/12/06 10:43:58
0 2016/12/06 10:44:06
0 2016/12/12 06:11:30
Alpine type r 8
Alpine type r 8
0 2016/12/16 09:45:39
Jl 12
Jl 12
0 2016/12/16 09:52:42
0 2016/12/18 17:38:25
0 2016/12/18 17:44:02
0 2016/12/18 17:44:12
0 2016/12/18 17:44:31
I tilted the tire carrier to match the angle of the rear glass. Had to do some cutting a such to make it work.
I tilted the tire carrier to match the angle of the rear glass. Had to do some cutting a such to make it work.
0 2016/12/18 17:48:34