Jeep Cherokee Forum
0 2020/07/25 10:07:28
0 2020/07/11 13:42:13
0 2020/07/11 13:40:50
0 2020/07/11 13:39:45
0 2020/06/27 15:44:27
0 2020/06/27 15:34:56
0 2020/06/27 15:33:34
0 2020/06/25 07:53:23
0 2020/06/25 07:52:19
0 2020/06/16 19:02:56
0 2020/06/16 19:01:38
Had to use ratchet straps to pull the axle up with the springs on cause there us no engine in it and no weight.
Had to use ratchet straps to pull the axle up with the springs on cause there us no engine in it and no weight.
0 2020/06/16 19:00:24
0 2020/06/05 18:04:15
I have to add maybe 2.5 inches of stop to be safe.
I have to add maybe 2.5 inches of stop to be safe.
0 2020/05/27 16:44:37
2 inch blocks installed to see what hits. Im cutting it up more thats for sure. Also the inner fenders seam is getting folded.
2 inch blocks installed to see what hits. Im cutting it up more thats for sure. Also the inner fenders seam is getting folded.
0 2020/05/27 16:43:24
I found this and was thinking Id missed something.
I found this and was thinking Id missed something.
0 2020/05/20 14:53:48
Its going rebuilt front to back. I already have the engine rebuilt.
Its going rebuilt front to back. I already have the engine rebuilt.
0 2020/05/20 14:48:16
I turned my own axle sleeves out if 2 inch dom tubing.
I turned my own axle sleeves out if 2 inch dom tubing.
0 2020/05/20 14:46:41
0 2020/05/20 14:43:14
Front and mid frame stiffeners installed.
Front and mid frame stiffeners installed.
0 2020/05/20 14:42:15
Tires just sitting next to it.
Tires just sitting next to it.
0 2020/05/20 14:41:19
Complete rebuild.
Complete rebuild.
0 2020/05/19 18:48:33
New hubs.
New hubs.
0 2020/05/19 18:47:55
Sprayed with Steel It.
Sprayed with Steel It.
0 2020/05/19 18:47:33
0 2020/04/27 20:32:50
0 2020/04/27 20:31:53
Really hard to weld in there.
Really hard to weld in there.
0 2020/04/27 20:30:56
0 2020/04/27 20:28:14
0 2020/04/27 20:27:16
0 2020/04/27 20:24:11
0 2020/04/27 20:23:03
0 2020/04/27 20:21:42
0 2020/04/27 20:18:52
0 2020/04/27 20:17:40
0 2020/04/27 20:16:29
0 2020/04/12 16:58:23
0 2020/04/12 16:56:00
Front stiffeners.
Front stiffeners.
0 2020/04/09 10:11:49
Not as hard to weld as you think.
Not as hard to weld as you think.
0 2020/04/09 10:11:27
Getting the under coat off is a messy but nit hard.
Getting the under coat off is a messy but nit hard.
0 2020/04/09 10:10:53