Jeep Cherokee Forum
0 2020/02/11 19:03:16
Bumper bracket installed.
Bumper bracket installed.
0 2020/02/11 19:04:21
0 2020/02/11 19:04:40
0 2020/02/11 19:05:58
0 2020/02/11 19:06:06
0 2020/02/11 19:07:18
0 2020/02/11 19:08:31
0 2020/02/11 19:09:41
0 2020/02/11 19:10:41
0 2020/02/11 19:11:57
0 2020/02/11 19:12:59
0 2020/02/11 19:14:13
0 2020/02/11 19:14:26
0 2020/02/11 19:15:48
33 inches bottom side to side.
33 inches bottom side to side.
0 2020/03/11 17:37:48
Dimple die
Dimple die
0 2020/03/11 17:38:56
11.5 inches x 24 bent at 2.5 inched
11.5 inches x 24 bent at 2.5 inched
0 2020/03/11 17:39:57
Mobile with wheels.
Mobile with wheels.
0 2020/03/11 18:06:44
24 inches tall and adjustable for level.
24 inches tall and adjustable for level.
0 2020/03/11 18:08:08
0 2020/03/29 12:11:20
Installing front frame stiffeners.
Installing front frame stiffeners.
0 2020/03/29 12:28:16
Makes welding and working way easier sitting on a stool.
Makes welding and working way easier sitting on a stool.
0 2020/03/29 12:28:36
I ground the spots to weld then painted it with Steel It. However after thinking about it im not doing that any more since the backside of the frame stiffener isn't sprayed so as long as i weld it tight and them paint it it should be fine for rust.
I ground the spots to weld then painted it with Steel It. However after thinking about it im not doing that any more since the backside of the frame stiffener isn't sprayed so as long as i weld it tight and them paint it it should be fine for rust.
0 2020/03/30 12:32:28
Getting the under coat off is a messy but nit hard.
Getting the under coat off is a messy but nit hard.
0 2020/04/09 10:10:53
Not as hard to weld as you think.
Not as hard to weld as you think.
0 2020/04/09 10:11:27
Front stiffeners.
Front stiffeners.
0 2020/04/09 10:11:49
0 2020/04/12 16:56:00
0 2020/04/12 16:58:23
0 2020/04/27 20:16:29
0 2020/04/27 20:17:40
0 2020/04/27 20:18:52
0 2020/04/27 20:21:42
0 2020/04/27 20:23:03
0 2020/04/27 20:24:11
0 2020/04/27 20:27:16
0 2020/04/27 20:28:14
Really hard to weld in there.
Really hard to weld in there.
0 2020/04/27 20:30:56
0 2020/04/27 20:31:53
0 2020/04/27 20:32:50
Sprayed with Steel It.
Sprayed with Steel It.
0 2020/05/19 18:47:33