Jeep Cherokee Forum
Share Your Pictures with Our Community. Upload Now
0 2016/08/27 16:32:03
0 2016/08/27 16:27:43
0 2016/08/27 15:41:48
Almost done.
Almost done.
0 2016/08/27 15:36:13
Had time! Sparyed it. Yes i sprayed it. I have done fabric on other rig and decided this route.. turned out pretty decent.
Had time! Sparyed it. Yes i sprayed it. I have done fabric on other rig and decided this route.. turned out pretty decent.
0 2016/08/27 15:35:49
This was interesting.. posted on another thread i made. Works!
This was interesting.. posted on another thread i made. Works!
0 2016/08/27 15:34:31
Yeah, these needed to go asap.
Yeah, these needed to go asap.
0 2016/08/27 15:31:23
They do the job and it was relatively cheap.
They do the job and it was relatively cheap.
0 2016/08/27 15:31:21
When in doubt, measure: 9" drums it is.
When in doubt, measure: 9" drums it is.
0 2016/08/27 15:31:18
0 2016/08/27 15:29:46
This is the route i went! Jeep Grand cherokee v8 isolators . The catch is they have a 1/2 inch bolt hole , at least mine do. The original bolt diameter on my rig is 7/16 so i got some spacers to change them to 1/2. They look too work fine. I could have drilled the engine side mounts to except new bolts also, but decided to go this route. Now to the bench vice!!
This is the route i went! Jeep Grand cherokee v8 isolators . The catch is they have a 1/2 inch bolt hole , at least mine do. The original bolt diameter on my rig is 7/16 so i got some spacers to change them to 1/2. They look too work fine. I could have drilled the engine side mounts to except new bolts also, but decided to go this route. Now to the bench vice!!
0 2016/08/27 15:26:39
0 2016/08/27 14:25:34
Advertisement
0 2016/08/27 13:47:32
0 2016/08/27 13:45:47
0 2016/08/27 13:44:57
0 2016/08/27 13:33:07
0 2016/08/27 13:26:06
Drying out from the cleaning.
Drying out from the cleaning.
0 2016/08/27 13:22:27
Drying out from the cleaning.
Drying out from the cleaning.
0 2016/08/27 13:19:47
what are these 2 things on the left for? and all these nuts? do you use them with the lock washers to attach wires to the gauge? (I am assuming the top 2 nuts are for studs on gauge if you are mounting directly into the instrument panel)
what are these 2 things on the left for? and all these nuts? do you use them with the lock washers to attach wires to the gauge? (I am assuming the top 2 nuts are for studs on gauge if you are mounting directly into the instrument panel)
0 2016/08/27 13:08:08
0 2016/08/27 13:08:05
straightforward instructions, but over my head.. help!?
straightforward instructions, but over my head.. help!?
0 2016/08/27 13:08:03
0 2016/08/27 13:08:00
new on left, old on right
new on left, old on right
0 2016/08/27 13:06:51
0 2016/08/27 12:57:14
Unloading at cabin on Core Banks, 07/16.
Unloading at cabin on Core Banks, 07/16.
0 2016/08/27 11:53:22
Front side of converter - OD larger
Front side of converter - OD larger
0 2016/08/27 11:26:29
Rear side of converter - OD smaller
Rear side of converter - OD smaller
0 2016/08/27 11:26:21
New cc without slots for hardware
New cc without slots for hardware
0 2016/08/27 11:26:13
0 2016/08/27 11:16:20
0 2016/08/27 11:15:56
0 2016/08/27 10:31:12
Advertisement