Jeep Cherokee Forum
Share Your Pictures with Our Community. Upload Now
0 2016/08/28 06:59:42
0 2016/08/28 06:59:36
0 2016/08/28 06:59:29
The shorter front tires didn't get my front end down enough. Need to look into the coil springs and see what can be done about losing two inches or if there even AMC Gremlin springs. Was a factory 6 cylinder and those ain't 6 cylinder coils.
The shorter front tires didn't get my front end down enough. Need to look into the coil springs and see what can be done about losing two inches or if there even AMC Gremlin springs. Was a factory 6 cylinder and those ain't 6 cylinder coils.
0 2016/08/28 01:46:41
Had to push these Jerks out to get the batteries charged.
Had to push these Jerks out to get the batteries charged.
0 2016/08/28 01:46:16
0 2016/08/28 01:46:01
The bottom end is what my buddy was told it was from the person he bought it from. A built 383. Not to long after purchasing it I got a little sceptical. Measured the stroke at 3.75 and crank is forged. Connecting rods are forged H beam 6.0" SYSC rods. Need to do some research on those. Never heard of SYSC. Pistons are probes. Possibly forged. Thats what my eyeballs and depth gauge gave me. I need to run some #s for exact specs.
The bottom end is what my buddy was told it was from the person he bought it from. A built 383. Not to long after purchasing it I got a little sceptical. Measured the stroke at 3.75 and crank is forged. Connecting rods are forged H beam 6.0" SYSC rods. Need to do some research on those. Never heard of SYSC. Pistons are probes. Possibly forged. Thats what my eyeballs and depth gauge gave me. I need to run some #s for exact specs.
0 2016/08/28 01:45:46
Had a few hang ups and didn't get as much done as I wanted. Buddy flaked, Ford battery was dead and both Jeep batterys were dead. Then my harmonic ballancer puller crapped out. My body was not having it either.
Had a few hang ups and didn't get as much done as I wanted. Buddy flaked, Ford battery was dead and both Jeep batterys were dead. Then my harmonic ballancer puller crapped out. My body was not having it either.
0 2016/08/28 01:45:16
Getting closer to 0 Turbo.
Getting closer to 0 Turbo.
0 2016/08/28 01:44:08
0 2016/08/27 20:55:34
0 2016/08/27 20:53:39
0 2016/08/27 20:53:03
Advertisement
0 2016/08/27 20:52:27
0 2016/08/27 20:48:38
0 2016/08/27 20:46:23
0 2016/08/27 20:45:36
0 2016/08/27 20:44:29
0 2016/08/27 20:22:18
0 2016/08/27 20:14:02
0 2016/08/27 19:00:41
0 2016/08/27 18:59:31
0 2016/08/27 18:57:56
0 2016/08/27 18:57:41
here is the latest photo of it. It is as taken apart as it has been in a while.
here is the latest photo of it. It is as taken apart as it has been in a while.
0 2016/08/27 18:10:08
0 2016/08/27 17:54:20
0 2016/08/27 17:53:50
0 2016/08/27 17:31:43
1 2016/08/27 17:31:06
0 2016/08/27 17:28:49
Bottom bolt
Bottom bolt
0 2016/08/27 17:04:10
Bottom adjustment bolt
Bottom adjustment bolt
0 2016/08/27 17:03:45
Bolts on power steering
Bolts on power steering
0 2016/08/27 17:02:52
Advertisement