Just another Comanche
#17
CF Veteran
Join Date: Oct 2008
Location: Hell, CA
Posts: 2,127
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1989
Model: Cherokee
Engine: 4.0L I6
Nice, One thing I do wish Clayton did was make their frame brackets for 3 holes, not just the stock 2.
I know that they recommend welding to the frame, but still.
Please, install some frame stiffeners. Then weld on the clayton crossmember brackets.
I know that they recommend welding to the frame, but still.
Please, install some frame stiffeners. Then weld on the clayton crossmember brackets.
#18
Member
Thread Starter
Join Date: Mar 2011
Location: Western Maryland, metropolis of Swanton
Posts: 208
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Frame plating (stiffening) is on the agenda thanks to the man from "Hell". Just joking. I cut off the upper and lower control arm mounts. I'm not an engineer, but it seemed fairly obvious that quite a bit of structural integrity was sacrificed in the process. I had already planned to stiffen things up a bit. Thanks, I can always use the help. Any suggestions on a supplier?