1986 Comanche restomod
#16
Newbie
Thread Starter
Just needs a winch.
So after 17 years it's back on the road with a valid inspection sticker. In the future I will focus on straightening out the body work, but I have other antique vehicles that need attention first.
So after 17 years it's back on the road with a valid inspection sticker. In the future I will focus on straightening out the body work, but I have other antique vehicles that need attention first.
#21
Newbie
Thread Starter
I bent up some brackets out of 11 gauge steel as spacers and welded them to the floor for the front. One of the back mounts sits on the floor, the other has some washers between it and the floor. The rear is bolted through the 11 gauge steel floor pan.
#23
Newbie
Thread Starter
I fluid filmed the underneath, if you are in an area that puts salt on the roads fluid film all your vehicles.
A pic of the CAD block off plate
Rear driveshaft is from a f-250 using conversion u joints
Seat brackets Cherokee to Comanche
A pic of the CAD block off plate
Rear driveshaft is from a f-250 using conversion u joints
Seat brackets Cherokee to Comanche