Wtf
#2
::Regional Moderator::
Join Date: Aug 2011
Location: Jacksonville, NC
Posts: 4,742
Likes: 0
Received 9 Likes
on
5 Posts
Year: 1993
Model: Cherokee
Engine: I6 4.0L HO
woah pics??
you mean your shakle is almost smaking you body ??? saggy leafs like mine or flat ones....you could try to look at you leafs or see if your shakles are effed up from trailing..how long have you had you r 3in lift
you mean your shakle is almost smaking you body ??? saggy leafs like mine or flat ones....you could try to look at you leafs or see if your shakles are effed up from trailing..how long have you had you r 3in lift
#3
CF Veteran
Join Date: Nov 2008
Location: Oak Harbor, WA.
Posts: 6,989
Likes: 0
Received 4 Likes
on
4 Posts
Year: 1987
Model: Cherokee
Engine: 4.0 liter RENIX I-6, DIY Cold Air Intake, 2.5 FM Exhaust, 3 Core Radiator
Please give more information. Anytime the wheel moves up, the leaf spring flattens out. That will cause the shackle to move toward the rear with the rear end of the leaf spring. this is normal. Please give more detail on what you are seeing.
#4
Member
Thread Starter
Join Date: May 2011
Location: lewiston,maine
Posts: 199
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0 straight 6
Usm was right instead if my shackles being at 90degrees ( which is where I thought they should be ) ,they're def some contact with extra weight, and I've had it for about 2 years and I know that the spring were spose to settle about an inch after a year but I don't know if I can re-adjust them without tweaking too much stuff around?
#5
::Regional Moderator::
Join Date: Aug 2011
Location: Jacksonville, NC
Posts: 4,742
Likes: 0
Received 9 Likes
on
5 Posts
Year: 1993
Model: Cherokee
Engine: I6 4.0L HO
Usm was right instead if my shackles being at 90degrees ( which is where I thought they should be ) ,they're def some contact with extra weight, and I've had it for about 2 years and I know that the spring were spose to settle about an inch after a year but I don't know if I can re-adjust them without tweaking too much stuff around?
#6
Member
Thread Starter
Join Date: May 2011
Location: lewiston,maine
Posts: 199
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0 straight 6
It's not drastic but it looks like the metal has rubbed I can hear it when driving I just took pics but when tryin to upload..... It says the attachment feature has crashed it looks as though I could jack it up,loosen the upper bolt and then straighten em n tighten up ? I hope lol
#7
::Regional Moderator::
Join Date: Aug 2011
Location: Jacksonville, NC
Posts: 4,742
Likes: 0
Received 9 Likes
on
5 Posts
Year: 1993
Model: Cherokee
Engine: I6 4.0L HO
It's not drastic but it looks like the metal has rubbed I can hear it when driving I just took pics but when tryin to upload..... It says the attachment feature has crashed it looks as though I could jack it up,loosen the upper bolt and then straighten em n tighten up ? I hope lol
Trending Topics
#8
Member
Thread Starter
Join Date: May 2011
Location: lewiston,maine
Posts: 199
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0 straight 6
Only when I have a passenger lol I hear it but ya I was so psyched when I found this app on my phone I knew It would b helpful thanks for replying
#9
CF Veteran
Join Date: Jun 2010
Location: Ohio
Posts: 2,117
Likes: 0
Received 3 Likes
on
3 Posts
Year: 1998
Model: Cherokee
Engine: 4.0 stock
Only on the side that is compressing and only to the point the spring is flat. The other side will do the opposite. The spring arches and the shackle moves forward.
#10
::Regional Moderator::
Join Date: Aug 2011
Location: Jacksonville, NC
Posts: 4,742
Likes: 0
Received 9 Likes
on
5 Posts
Year: 1993
Model: Cherokee
Engine: I6 4.0L HO
that is normaly flex..but if it is smacking on one side and not the other then check to make sure your shakle is not the wrong length bent or twisted