New Owner in Canada
#1
Newbie
Thread Starter
Join Date: Oct 2010
Location: Guelph, On
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0L
New Owner in Canada
Noob to the site.
2000 Cherokee Limited Black.
Interested in Lifting this puppy and putting some nice mudder's on it.
I've only had it a month and love it!
2000 Cherokee Limited Black.
Interested in Lifting this puppy and putting some nice mudder's on it.
I've only had it a month and love it!
#4
Newbie
Thread Starter
Join Date: Oct 2010
Location: Guelph, On
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0L
#7
CF Veteran
Join Date: Oct 2010
Location: Ontario, Canada
Posts: 2,150
Likes: 0
Received 12 Likes
on
9 Posts
Year: 1989 Laredo
Model: Cherokee
Engine: 4.0 L 6 Renix
Yer Lift
for lift kit try Stitch at Offroad Outfitters out of Toronto, Stitch is from Kitchener, Caged can give you some good advice, I/ve seen his XJ flex, just insane! 4" is a nice height target, research the net a little on what's available and what parts are affected. A front end alignment will be in order after the hardware install. Check out a site, Gojeep.com out of Aussi land, nice build up and really well organized how to website. By the way, Welcome!
Trending Topics
#8
CF Veteran
yeah, stitch is great with jeeps. especially xj's.
you don't want a cheap lift, they feel stiff and consist of inferior parts/product.
for your desired height, i would go with some RE front coils, some adjustable control arms, maybe some drop brackets and a bastard leaf pack.
stitch can definitely get you started.
you don't want a cheap lift, they feel stiff and consist of inferior parts/product.
for your desired height, i would go with some RE front coils, some adjustable control arms, maybe some drop brackets and a bastard leaf pack.
stitch can definitely get you started.
Thread
Thread Starter
Forum
Replies
Last Post
Freakn
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
52
10-04-2015 06:34 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)